Cisco ASA 5506W-X 설치 매뉴얼 - 페이지 31

{카테고리_이름} Cisco ASA 5506W-X에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506W-X 46 페이지. Threat defense reimage guide
Cisco ASA 5506W-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 구성 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (14 페이지), 간편한 설정 매뉴얼 (11 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (12 페이지), 섀시 마운트 (10 페이지)

Mount the Chassis

Note

Do not remove the rubber feet included with the ASA because they are needed for proper cooling for all

mounting orientations.

•

You can mount the chassis on a desktop by placing it on a desk in a horizontal position. Make sure there are

no blockages or obstructions within one inch of the top of the chassis or within .5 inch of the sides and back,

so that nothing interferes with cooling. Do not remove the rubber feet included with the chassis. They are also

needed for proper cooling.

Caution

Do not stack the chassis on top of another chassis. If you stack the units, they will overheat, which causes the

units to power cycle.

Online Only

Desktop-Mount the Chassis, on page 27

Wall-Mount the Chassis, on page 28

Rack-Mount the Chassis, on page 29

Install the ASA 5506H-X in a DIN Rail, on page 30

Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide

C H A P T E R