Sony MHC-BX3 사용 설명서 - 페이지 45
{카테고리_이름} Sony MHC-BX3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-BX3 48 페이지. Mini hi-fi component system
Sony MHC-BX3에 대해서도 마찬가지입니다: 사용 설명서 (49 페이지)
페이지 인쇄
Specifications
AUDIO POWER SPECIFICATIONS:
(MHC-BX3 U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
120-10,000 Hz; rates 75 watts per channel
minimum RMS power, with no more than
10% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Canadian model:
MHC-BX3:
Continuous RMS power output (reference)
Total harmonic distortion less than 0.07%
European model:
MHC-BX3:
DIN power output (rated) 45 + 45 watts
Continuous RMS power output (reference)
Music power output (reference)
Other model:
MHC-DX3:
The following measured at AC 120, 220, 240 V
50/60 Hz
DIN power output (rated) 75 + 75 watts
Continuous RMS power output (reference)
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz, 35 W)
(6 ohms at 1 kHz, DIN)
60 + 60 watts
(6 ohms at 1 kHz,
10% THD)
150 + 150 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz, DIN)
100 + 100 watts
(6 ohms at 1 kHz,
10% THD)
Inputs
MD/VIDEO IN:
(phono jacks)
MIC:
(mini jack)
Outputs
PHONES:
(stereo mini jack)
SPEAKER:
MHC-BX3:
MHC-DX3:
CD player section
System
Laser
Laser output
Wavelength
Frequency response
Signal-to-noise ratio
Dynamic range
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
Output Level
voltage 450/250 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
accepts headphones of
8 ohms or more
accepts impedance of 6 to
16 ohms
accepts impedance of 6 to
16 ohms
Compact disc and digital
audio system
Semiconductor laser
( =780 nm)
Emission duration:
continuous
Max. 44.6 W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 – 790 nm
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
660 nm
–18 dBm
continued
45