Sony MHC-BX3 사용 설명서 - 페이지 9
{카테고리_이름} Sony MHC-BX3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-BX3 49 페이지. Mini hi-fi component system
Sony MHC-BX3에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지)
페이지 인쇄
To erase a preset st at ion
1 Press and hold TUNER MEMORY until a
preset number appears in the display.
2 Turn the shuttle until it clicks to select the
preset number you want to erase.
Select "ALL ERASE" when you want to
erase all the preset stations.
3 Press ENTER.
"COMPLETE" appears.
When you erase a preset number, the preset
number decreases by one and all preset
numbers following the erased one are
renumbered.
To change t he AM t uning int erval
(Except f or t he European and M iddle
East ern m odels)
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To switch the AM tuning
interval, tune in any AM station first, then turn off
the power. While holding down ENTER, turn the
power back on. When you change the interval, AM
preset stations are erased. To switch back to the
original interval, repeat the same procedure.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or a power failure
occurs.
Downloaded from:
https://www.usersmanualguide.com/
Saving t he pow e r in
st a ndby m ode
(M HC-BX3 only)
You can lower the power consumption to a
minimum (Power Saving Mode) and save
energy in the standby mode.
?/1
(Pow er)
DISPLAY
, Press DISPLAY repeatedly when the
power is off. Every time you press
the button, the system switches as
follows:
t Demonstration t Clock
Power Saving Mode T
The system is turned on/off by pressing
?/1.
Tips
• ?/1 indicator and timer indicator (when the timer
is set) light even in the Power Saving Mode.
• The timer functions in the Power Saving Mode.
Not e
You cannot set the time in the Power Saving Mode.
To cancel t he Pow er Saving M ode
Press DISPLAY once to show the
demonstration, twice to show the clock
display.
9