Sony MHC-BX7 - Shelf System 사용 설명서 - 페이지 39

{카테고리_이름} Sony MHC-BX7 - Shelf System에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-BX7 - Shelf System 48 페이지. Sony home audio system model mhc-bx9 operating instructions

페이지 인쇄

Tip

When you connect a Sony MD deck, you can use the

MD N, X, and x buttons on this unit's remote to

perform play, pause, and stop operations.

Note

If you cannot select "MD" even when you have

pressed MD (VIDEO), press ?/1 while pressing MD

(VIDEO) when the power is turned off. "VIDEO"

will be switched to "MD". To return to "VIDEO" do

the same procedure. However, you cannot switch

from MD to VIDEO or from VIDEO to MD when the

system is in the Power Saving Mode (see page 9).

Connecting a VCR

Make sure to match the color of the plugs and

the connectors. To listen to the sound of the

connected VCR, hold down MD (VIDEO) and

press ?/1 when the power is turned off. This

switches the "MD" function to "VIDEO".

Once you enable the "VIDEO" function, just

press MD (VIDEO).

By connecting the audio output jacks of your

VCR to the MD/VIDEO (AUDIO) jacks using

an optional audio cable, you can enjoy video

playback in powerful stereo sound.

To the audio output of the VCR

Note

• You cannot switch from MD to VIDEO or from

VIDEO to MD when the system is in the Power

Saving Mode (see page 9).

• If the sound is distorted or too loud when

selecting "VIDEO", or you want to switch back to

"MD", repeat the operation described above for

switching to "MD".