Sony MHC-DX8 사용 설명서 - 페이지 26

{카테고리_이름} Sony MHC-DX8에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-DX8 48 페이지.

페이지 인쇄

Recording a CD by specifying track

order (continued)

Press X to insert a pause at the end

of side A.

"P" appears in the display and the total

playing time resets to "0.00" in the

display.

Repeat steps 5 and 6 for tracks from

the same disc or steps 4 to 6 for

tracks from another disc to program

the remaining tracks to be recorded

on side B.

Press CD SYNC HI-DUB.

Deck B stands by for recording and the

CD player stands by for playback. REC

PAUSE/START button blinks.

Press DIRECTION repeatedly to

select g to record on one side.

Select j (or RELAY) to record on

both sides.

Press REC PAUSE/START.

Recording starts.

To stop recording

Press x.

To check the order

Press CHECK on the remote repeatedly. After

the last track, "CHECK END" appears.

To cancel Program Edit

Press PLAY MODE repeatedly until "PGM"

or "SHUFFLE" disappears from the display.

Tip

When you want to reduce the hiss noise in low-level

high-frequency signals, press DOLBY NR so that

"DOLBY NR" appears after pressing CD SYNC HI

DUB.

Selecting tape length

automatically

—Tape Select Edit

You can check the most suitable tape length

for recording a CD. Do the following steps

before recording.

Place a CD.

Press CD.

Press EDIT once, so that "EDIT"

flashes.

The required tape length for the

currently selected CD appears, followed

by the total playing time for side A and

side B respectively.

Note

You cannot use Tape Select Edit for discs containing

over 20 tracks.