Sony MHC-ESX6 사용 설명서 - 페이지 23
{카테고리_이름} Sony MHC-ESX6에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-ESX6 28 페이지. Home audio system
Messages
One of the following messages may
appear or flash in the display panel during
operation.
CANNOT PLAY
A disc that cannot be played back was
inserted.
DATA ERROR
You tried to play back a file that is not
playable.
DEVICE ERROR
The USB device could not be recognized
or an unknown device is connected.
DEVICE FULL
The memory of the USB device is full.
ERASE ERROR
Erase of the audio files or folders failed.
FATAL ERROR
The USB device was removed during
transferring or erase operation, and may
have been damaged.
FOLDER FULL
The number of folders has reached the
maximum.
FULL
You tried to program more than 25 steps.
HUB NOT SUPPORT
A USB hub is connected.
NoDEVICE
No USB device is connected.
NO DISC
There is no disc on the disc compartment
or you have loaded a disc that cannot be
played back on this system.
NoMEMORY
The memory selected for playback or
transfer has no memory media inserted in
the USB device.
NO STEP
All of the programmed steps have been
erased.
NO SUPPORT
An unsupported USB device is connected.
NO TRACK
No playable file is loaded in the system.
NOT USE
You tried to perform a specific operation
under conditions where that operation is
prohibited.
OVER CURRENT
An over current from the
detected.
PROTECT
The USB device is write-protected.
PUSH SELECT
You tried to set the clock or timer during
timer operation.
PUSH STOP
You tried to perform an operation that can
be performed only when the playback is
stopped.
READING
The system is reading information of the
disc or USB device. Some operations are
not available.
REC ERROR
Transferring did not start, stopped
partway, or otherwise could not be
performed.
SET CLOCK
You pressed CLOCK/TIMER SELECT
before the clock is set.
SET TIMER
You pressed CLOCK/TIMER SELECT
before the Play Timer is set.
TIME NG
The Play Timer start time and stop time is
the same.
TRACK FULL
The number of files has reached the
maximum.
UNLOCKED
The disc theft-preventive function is
released.
port was
GB
23