Sony MHC-GNX600 사용 설명서 - 페이지 11

{카테고리_이름} Sony MHC-GNX600에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-GNX600 40 페이지. Mini hi-fi component system

페이지 인쇄

Do this

Select a disc when

Press one of the DISC 1 ~ 3

playback is stopped

buttons or DISC SKIP/EX-

CHANGE (or DISC SKIP on

the remote).

Switch to CD

Press one of the DISC 1 ~ 3

function from

buttons (Automatic Source

another source

Selection).

Exchange other

Press DISC SKIP/EX-

discs while playing

CHANGE.

Remove a disc

Press Z OPEN/CLOSE.

The elapsed playing time may not be displayed

correctly depending on the MP3 audio tracks.

(MHC-GNX660 only)

You cannot find a point in a track when playing a

CDG.

Notes

• You cannot change the play mode during playback.

• The following discs with MP3 audio tracks take a

longer time to start playback.

– a disc recorded with complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added (non-finalized

disc).

• When the disc with MP3 audio tracks is loaded, the

system reads all the tracks on that disc. If there are

many albums or non-MP3 audio tracks on the disc, it

may take a longer time for playback to begin or for

the next MP3 audio tracks to start playback.

• You are recommended not to save other types of

tracks or unnecessary albums on a disc that has MP3

audio tracks.

• Attempting to play back non-MP3 format files that

have the extension ".MP3" may result in noise or

malfunction.

• The system can play back to a depth of 8 folders

only.

• When naming the MP3 audio tracks, be sure to add

the file extension ".MP3" to the file name.

• An album that does not include an MP3 audio track

is skipped.

• The maximum number of albums on a disc which can

be recognize by this system is 150 (including root

album).

• The maximum number of MP3 audio tracks and

albums on a disc which can be recognize by this

system is 300.

• Depending on the encoding/writing software,

recording device, or the recording media used at the

time an MP3 audio track is recorded, you may

encounter problems such as cannot play back, sound

interruptions and noise.

Tips

• When you press CD or one of the DISC 1 ~ 3 buttons

to switch to "CD" function from "TUNER" function,

you may require a longer time to access the disc. In

this case, set the CD power manage function to "CD

POWER ON" (page 14).

• If you press CD while the system is turned off, the

system turns on automatically and "CD" is selected

as the function.

• You can also press FUNCTION on the remote

repeatedly to select "CD".

• (MHC-GNX660 only)

When you play back a CDG, some operation may

cause image distortion on the video output.

• During Shuffle Play, some tracks may be played

back repeatedly.

Playing repeatedly

— Repeat Play

You can play back all the tracks or a single track

on a disc repeatedly.

Use buttons on the remote for the operation.

Press REPEAT repeatedly during playback

until "REP" or "REP1" lights up in the

display.

REP: All the tracks on the disc(s), or all the

tracks in the album

are played back repeatedly

up to five times

REP1: A single track is played back repeatedly

until "REP1" is cancelled.

When "ALBM" is selected for MP3 audio tracks.

For MP3 audio tracks, the play back is endless when

the play mode is "1 DISC SHUF" or "ALBM

SHUF".

To cancel Repeat Play

Press REPEAT repeatedly until both "REP" and

"REP1" disappear from the display.

Note

You cannot select "REP" and "ALL DISC S SHUF" at

the same time.

Tip

You can change the Repeat Play setting when the

playback is stopped.