Sony MHC-GPX888 사용 설명서 - 페이지 22
{카테고리_이름} Sony MHC-GPX888에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-GPX888 48 페이지.
페이지 인쇄
REC1 Transfer
Source
Audio files
AUDIO CD
Analog Transfer
Source
FM
AM
AUDIO IN 1/
AUDIO IN 2
* Folder and file numbers are assigned serially
thereafter.
Notes on transfer
• While transferring (except analog transfer),
no sound is output.
• CD-TEXT information is not transferred to
the created MP3 files.
• The transfer stops automatically if:
– the USB device runs out of space during
transfer.
– the number of audio files or folders on the
USB device reaches the limit that the
system can recognize (page 17).
• If a folder or file that you are trying to transfer
already exists on the USB device with the
same name, a sequential number is added after
the name without overwriting the original
folder or file.
• You cannot perform the following operations
during transfer:
– Eject the disc.
– Select another track or file.
– Pause playback or find a point in the track or
file.
– Change the function or tuner band.
• When transferring music to a Walkman
using "Media Manager for WALKMAN", be
sure to transfer in MP3 format.
• When connecting a Walkman
be sure to connect after the display "Creating
Library" or "Creating Database" on the
®
Walkman
GB
22
Folder name
File name
"REC1-MP3"
Same as the
source
"REC1-CD"
"TRACK001"*
Folder name
File name
"TUFM0001"*
"TRACK001"*
"TUAM0001"*
"EXAU0001"*
®
to the system,
has disappeared.
Tuner
Listening to the radio
1
Press FUNCTION repeatedly to
select FM or AM band.
2
For automatic scanning:
Hold down TUNING+/– until the
frequency indication changes and then
release.
Scanning stops automatically when a
station is tuned in. "TUNED" and
"ST" (for FM stereo programs only)
light up in the display panel.
If "TUNED" does not light up and
scanning does not stop, press x to stop
scanning. Then, perform manual
tuning (below).
For manual tuning:
Press TUNING+/– repeatedly to tune
to the station you want.
Note
When you tune to an FM station that provides
RDS services, information such as the service
name or station name is provided by broadcasts.
You can check the RDS information by pressing
DISPLAY repeatedly.
Tip
To reduce static noise on a weak FM stereo
station, press FM MODE repeatedly until
"MONO" lights up in the display panel.
®