Sony MHC-GRX40AV 사용 설명서 - 페이지 11
{카테고리_이름} Sony MHC-GRX40AV에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-GRX40AV 44 페이지. Micro hi-fi component system
Sony MHC-GRX40AV에 대해서도 마찬가지입니다: 사용 설명서 (44 페이지)
페이지 인쇄2
Press and hold + or – until the
frequency indication starts to
change, then release.
Scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo program) appear.
ALL DISCS
3
Press TUNER MEMORY.
A preset number flashes in the display.
ALL DISCS
4
Press ENTER/NEXT.
The station is stored.
5
Repeat steps 1 to 4 to store other
stations.
To tune in a station with a weak
signal
Press + or – repeatedly in step 2 to tune in the
station manually.
To set another station to the exist
preset number
Start over from step 1. After step 3, press + or
– repeatedly to select the preset number you
want to store the station.
MONO
TUNED
STEREO
VOLUME
kHz
MHz
ß
Preset number
VOLUME
ß
To erase a preset number
1 Press and hold TUNER MEMORY until the
preset number flashes in the display.
2 Press + or – repeatedly to select the preset
number you want to erase.
If you want to erase all preset numbers,
select "ALL ERASE".
3 Press ENTER/NEXT.
When you erase a preset number, the total
number of preset stations decreases by one.
You can add a new preset number after the
last preset number.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
11