Sony MHC-GT22 사용 설명서 - 페이지 37
{카테고리_이름} Sony MHC-GT22에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-GT22 44 페이지.
페이지 인쇄
Tape deck
The sound exhibits excessive wow or
flutter or dropout.
Clean the capstans and pinch rollers.
Also, clean and demagnetize the tape
heads. See "Precautions" for details
(page 39).
To change the AM tuning interval
The AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas). You
cannot change the AM tuning interval in
Power Saving Mode.
Use buttons on the unit to change the
AM tuning interval.
1
Tune in any AM station, and then
turn off the system.
2
While holding down TUNING +
press /
.
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
To improve tuner reception
Turn off the CD/USB player power by
using the CD/USB power management
function. By default, the CD/USB power
is turned on. You cannot change the
setting in Power Saving Mode.
Use buttons on the unit to turn off the
CD/USB player power.
1
Press CD
to select the CD
function.
2
Press /
to turn off the system.
3
After "STANDBY" stops flashing, press
/
"CD/USB POWER OFF" appears.
When the CD/USB player power
is turned off, the disc access time
increases. In addition, when the
TUNER function is selected, power is
not supplied to the USB device, so it is
not recognized even if connected.
To turn on the CD/USB player power,
repeat the procedure until "CD/USB
POWER ON" appears.
To reset the system to factory settings
If the system still does not operate
properly, reset the system to factory
settings. You cannot reset the system to
factory settings in Power Saving Mode.
Use buttons on the unit to reset the
system to its factory default settings.
,
1
Disconnect and reconnect the power
cord, and then turn on the system.
2
Press ,
the same time.
"COLD RESET" appears in the display.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
while holding down
, and GROOVE
.
at
GB