Sony MHC-GX99 운영 지침 - 페이지 3
{카테고리_이름} Sony MHC-GX99에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-GX99 4 페이지. Powerful entry mini hifi system with 3cd changer, tape and mp3 playback. (2x 65w rms power output)
Sony MHC-GX99에 대해서도 마찬가지입니다: 사양 (2 페이지), 운영 지침 (2 페이지), 사양 (2 페이지), 운영 지침 (2 페이지), 운영 지침 (2 페이지)
페이지 인쇄
Creating your own CD program
(Program Play)
Use buttons nn the remnte tn create ynur nwn program.
1 Press CD [] to select the CD function.
2 Press PLAY MODE [] repeatedly until "PGM"appears
while the player is stopped.
3 Press DISC SKIP [_ to select a disc.
4 Press 1.441/1_1 (or []<}<UDfl>Don the unit) []
repeatedly until the desired track number appears.
When programing
MP3 files, press _
+/- []
repeatedly to select the desired iolder, and then select
the desired file.
Selected trackor filenumber
I
2
Total playing timeofthe
selected t rack
5 Press ENTER[] to add the track or file to the
program.
6 Repeat steps 3 through Sto program additional
tracks or files, up to a total of 25 tracks or files.
7 To playyour program of tracks or files, press _
(or
CD I,,-II on the unit) [].
The program remains available until you open the disc
tray. To play the same program again, select the CD
flmction, and press IJ_ (or CD I_IN on the unit) [].
To cancel
Program
Play
Press
PLAY MODE
[]
repeatedly
until
"PGM"
disappears
while
the player
is stopped.
To delete
the
last
track
or file
of the
program
Press
CLEAR
[]
on the remote
while
the player
is
stopped.
To view program
information,
such as total
track number
of the program
Press DISPLAY [] repeatedly.
Presetting radio stations
_*_u]can preset your iavorite radio stations and tune
them in instantly by selecting the corresponding
preset
number.
I
Tune in the desired station (See"Listening to the
radio").
2 Press TUNER MEMORY [] on the remote.
Preset number
3 Press +/- (orTUNING + or - on the unit) []
repeatedly to select your desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4 Press ENTER[] on the remote.
5 Repeat steps I through 4 to store other stations.
5_u can preset up to 20 FM and 10 AM stations. The
preset stations are retained lor about half a day even
ifynu disconnect
the power cord or ira power lailure
occurs.
6 To call up a preset radio station, pressTUNING
MODE [] repeatedly until "PRESET"appears, and
then press +/- (or TUNING + or - on the unit) []
repeatedly to select the desired preset number.
Recording onto a tape (Except for
North American model)
Use a TYPE I (normal) tape onb,0
52}u can record just the portions you like from a sound
source, including connected
audio components.
Use buttons on the unit to control tape recording.
1 Insert a recordable tape into the cassette holder
with the side you want to record facing up.
2 Prepare the recording source.
Select the desired source to record.
Place the disc ynu want to record and press DIS("
SKIP/EX-CHANGE
[_ to select a disc.
When recording a fblder from an MP3 disc, press
PLAY MODE [] repeatedly to select "CZ1;'and then
press D
+/
[_ repeatedly to select the desired
fblder.
To record only your fhvorite CD tracks or MP3 files in
}'our desired order, perfbrm
steps 2 to 5 of"Creating
}'our own CD program2
3 Start recording.
Press•
(record) _, and then start playing the
desired recording source.
The CD starts playing automatically
after 10 seconds
have passed.
If there is noise while recording from the tuner,
reposition the appropriate
antenna to reduce the
noise.
While recording, ynu cannot listen to other sources.
To stop recording
Press I _--[_.
Tip
We recommend lhat you press II _ first, and then press I_
_1 to
avoid noise being recorded when you stop recording.
Using the timers
The system offers twn timer iunctinns. If you use both
timers, the Sleep Timer has priorit)_
Sleep
Timer:
You can lall asleep to music.
This
flmction
works
even
if
the clock is not set.
Press SLEEP
_
on the remote
repeatedly.
If you select
'AUTO:'
the system
automatically
turns
off after the
current
disc or tape stops or in 100 minutes.
If the tape deck is still playing
or recording
at the set
tin]e, the system
turns
offafter
the tape deck stops.
Play Timer:
_u
can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
I
Preparethe sound source.
Prepare the sound source, and then press VOLUME
+/- [] to adjust the volume.
To start ficom a specific CD track or MP3 file, create
}'our own CD program.
2 Press CLOCK/TIMER SET[_].
3 Press I_1_/1_1_1 [] repeatedly to select"PLAY"and
then press ENTER[].
"ON TIME" appears, and the ]]our indication flashes.
4 Set the time to start playing.
Press I_I_I/I_I
[] repeatedly to set the hour, and
then press ENTER[].
The minute indication
flashes. Use the procedure
above to set the minutes.
5 Usethe same procedure as in step 4to set the time
to stop playing.
6 Select the sound source.
Press _/1_)4
[] repeatedly until the desired
sound source appears, and then press ENTER []. The
display shows the timer settings.
7 Press I/(_) [_ to turn off the system.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER
SELECT _,
press _/I,t_1
[] repeatedly until "PLAY SEL" appears, and the]] press
ENTER [].
To cancel the timer
Repeat the same procedure as above until "OFF" appears,
and then press ENTER [].
To change the setting
Start over from step 1.
Tip
"Ihet layTimer setting remains as kingas tl_esettingis nol canceled
manuall)_
I
Make sure the power cord and speaker cords are
correctly and firmly connected.
2 Find your problem in the checklist below, and take
the indicated corrective action.
If the issue persists, contact your nearest Sony dealer.
If the STANDBY indicator flashes
hnmediately
unplug the pnwer cnrd, and check the
fbllowing item.
* If your system has a voltage selector, is the voltage
selector set to the correct voltage?
After the STANDBY indicator [] on the unit stops
flashing, reconnect
the power cord, and turn on the
system. If the issue persists, contact }'our nearest Sony
dealer.
General
The system does not turn on.
• Is the power cord plugged in?
• Is the voltage selector set correctly to match the
local power line voltage? Saudi Arabian models also
may not turn on when the voltage selector is set to
NO OPERATION.
There is no sound.
• Are the + and
speaker cords short circuited?
• Are you using only the supplied speakers?
• Is anything blocking the ventilation holes on the back
of the system?
Sound comes from one channel,
or the left and
right
volumes
are unbalanced.
• Place the speakers as synnnetrically as possfl4e
• Connect
nnly the supplied speakers.
Severe hum or noise.
• Move the system away from sources of noise.
• Connect
the system to a different wall socket.
• Install a noise filter (available separately) to the power cord.
The remote does not function.
• Remove any obstacles between the remote and the
remote sensor _
on the unit, and position
the unit
away from fluorescent lights.
• Point the remote at the system's sensor.
• Mnve the remote closer to the system.
CD/MP3 player
The sound skips, or the disc will not play.
• Wipe the disc clean, and replace it.
• Mnve the system to a location away from vibration
(for
example, on top of a stable stand).
• Move the speakers away from the system, or place them
on separate stands. At high volume, speaker vibration
may cause the sound to skip.
Play does not start from the first track.
• Return to Nnrmal Play by pressing PLAY MODE []
repeatedly until both "PGM" and "SHUF" disappear.
Starting playback takes more time than usual.
• The _llnwing discs take a longer time to start pl_back.
-a disc recorded with a complicated
tree structure.
-a disc recorded in nmltisession
mode.
-a disc that has not been finalized (a disc to which data
can be added).
-a disc that has many folders.
The disc tray does not open and "LOCKED"
appears.
• Contact your Sony dealer or local authorized
Sony
service lacility.
Tuner
Severe hum or noise, or stations cannot be
received. ("TUNED" or"STEREO"flashes on the
display.)
• Connect the antenna proper_
• Find a location and an orientation that provide good
reception, and then set up the antenna again.
• Keep the antennas away from the speaker cords and the
power cord to avoid picking up noise.
• Tnrn offnearby electrical equipment.
Tape deck (Exceptfor North American
model)
The sound exhibits
excessive wow or flutter or
dropout.
• Clean the capstans and pinch rollers. Also, clean and
demagnetize the tape heads. See "Precantions" for details.
Tochange the AM tuning interval
The AM tuning interval is fhctnry preset tn 9 kHz nr
10 kHz (fbr some areas: this function is not available on
the European,
Russian and Saudi Arabian models).
Use buttons on the unit to change the AM tuning
interval.
1 Tune in any AM station, and then turn off:the
system.
2 Press DISPLAY [] to displaythe
clock.
3 While holding downTUNING + [], press 1/_ (on/
standby) []].
All the AM preset stations are erased. To reset the
interval to the lactory preset, repeat the procedure.
Toimprove tuner reception
Tnrn off CD pla),er l>ower 1)_} u sing the CD power
management
iunction. By defiudt, CD power is tnrned on.
I Press CD on the remote (or FUNCTION repeatedly)
[] to select the CD function.
2 Press I/(_) [] to turn offthe
system.
3 After"STANDBY"stops
flashing, press DISPLAY []
to display the clock and then press I/(_) [] while
holding down • [] on the unit.
"('D POWER OFF" appears. \Vit]] ('D player pnwer
turned off. disc access time is increased. To turn on
CD player power, repeat the procedure until "CD
POWER ON" appears.
To reset the system to factory settings
If the system still does not nperate properb, oreset the
system to fhctory settings.
Use buttons on the unit to reset the unit to its Iactory
defhult settings.
1 Disconnect
and reconnect
the power cord, and then
turn on the system.
2 Press PLAYMODE [], FUNCTION [], and I/(_ [] at
the same time.
All user configured settings, such as preset radio
stations, timer, and the clock, are deleted.
CANNOTLOCK : The system cannot be locked after
ynu have done the procedure of"When carrying this
system2
COMPLETE : The preset operation ended normally.
FULL : _u tried to program more than 25 tracks or files
(steps).
LOCKED : The disc tray does not open. Contact your
nearest SoW dealer.
NO DISC: There is no disc in the player, or you have
loaded a disc that cannot be played.
NO STEP: All of the programed tracks have been erased.
NOTUSED: 52_u pressed an invalid button.
OVER: You have reached the end of the disc while
pressing _
[] during playback or pause.
PUSHSELECT : 52_utried to set the clock or timer during
timer operation.
PUSHSTOP :You pressed PLAYMODE [] during
playback.
READING: The system is reading infbrmation from the
disc. Some buttons are not available.
SETCLOCK : 52_u tried to select the timer when the clock
is not set.
SETTIMER : Youtried to select the timer when the Play
Timer is not set.
TIMENG : The PlayTimer start and end times are set to
the same time.
Display examples
Display
indicates
2 (two)
; (five)
12T
6(six)
1_'
8 (eight)
*>l
0 (zero)
El
/q'
A
B
"r_
D
rj
b-
<
H
H
U
K
It
I_,l
M
rl
t-t
0
u
t-t
Q
R
R
v
S
2
*v
Z
L
I
Discs that this system CAN play
• Audio CD
• CI)-R/CD-RW
(audin data/MP3 files)
Discs that
this
system
CANNOT
play
• CD-ROM
• CD R/CD
RW other
than
those
recorded
in music
CD
lormat
or MP3
Ibm]at
conforming
to ISO9660
Level
I/Level
2, Joliet
• CD-R/CD-RW
recorded
in nmltisession
that have not
ended
by "closing
the session"
• CD-R/CD-RW
of poor
recording
quality.
CD-R/
CD-RW
that have
scratches
or are dirty, or CD-R/CD-
RW recorded
with
an incompatible
recording
device
• CD R/CD
RV¢ which
is finalized
incorrectly
• Discs
containing
files other
than
MPEG
1 Audio
Layer-
3 (MP3)
files
• Discs
of non
standard
shape
(fbr example,
heart,
square,
star)
• Discs
that have adhesive
tape, paper,
or sticker
attached
to then]
• Rental
or used discs with
attached
seals where
the glue
extends
beyond
the seal