Sony MHC-LX10000 - High Power Mini Hi-fi System 사용 설명서 - 페이지 19
{카테고리_이름} Sony MHC-LX10000 - High Power Mini Hi-fi System에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-LX10000 - High Power Mini Hi-fi System 40 페이지. Limited warranty (us only)
Sony MHC-LX10000 - High Power Mini Hi-fi System에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 사양 (2 페이지), 제한 보증 (1 페이지), 사용 설명서 (39 페이지)
페이지 인쇄
Sound Adjustment
Adjusting the sound
You can reinforce the bass and create a more
powerful sound.
Press GROOVE repeatedly.
Each time you press the button, the display
changes cyclically as follows:
GROOVE ON* t GROOVE OFF
* The volume switches to power mode and the
equalizer curve changes.
Tips
• The default setting is "GROOVE ON".
• When "GROOVE ON" is selected,
"GROOVE" lights up in the display.
Selecting the preset
effect
Turn OPERATION DIAL clockwise or
counterclockwise (or press EQ on the
remote repeatedly) to select the preset
effect you want.
Preset effect options
Effect
Category
ROCK
Standard music sources
POP
JAZZ
DANCE
SOUL
TECHNO
HIP HOP
REGGAE
SAMBA
CLASSICAL
FLAT
Original music source
USER EQ 1
User equalizer setting
USER EQ 2
USER EQ 3
To cancel the preset effect
Turn OPERATION DIAL clockwise or
counterclockwise until "FLAT" appears in the
display.
Adjusting the graphic
equalizer or selecting the
surround effect
You can adjust the sound by raising or lowering
the level of specific frequency band, then store
up to three user equalizer setting in the memory.
1
Press EQ BAND repeatedly to select a
frequency band or surround effect.
2
Turn OPERATION DIAL clockwise or
counterclockwise to adjust the level or
select surround effect you want.
Frequency band
3
Repeat step 1 and 2 to adjust the level
of other frequency bands.
4
Press ENTER.
A user equalizer number flashes in the
display.
5
Turn OPERATION DIAL clockwise or
counterclockwise to select a user
equalizer number (1~3) you want to
store the equalizer setting.
6
Press ENTER.
This setting is automatically stored as the
user equalizer setting you selected in step 5.
The previous setting stored at this memory
location is erased and replaced by the new
setting.
Tip
If you do not want to store the equalizer setting, select
"EXIT?" in step 5.
Frequency level
continued
19
US