Sony MHC-R550 사용 설명서 - 페이지 25

{카테고리_이름} Sony MHC-R550에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-R550 48 페이지. Sony operating instructions mini hi-fi component system mhc-rxd5, mhc-r550, mhc-grx30, mhc-grx30j
Sony MHC-R550에 대해서도 마찬가지입니다: 사용 설명서 (49 페이지)

페이지 인쇄

Repeat steps 5 and 6 for tracks from

the same disc or steps 4 to 6 for

tracks from another disc to program

the remaining tracks to be recorded

on side B.

Press CD SYNC.

Deck B stands by for recording and the

CD player stands by for playback. The

indicator on TAPE B ( (for front side)

lights up.

Press DIRECTION repeatedly to

select A to record on one side.

Select ß (or RELAY) to record on

both sides.

Press REC PAUSE/START.

Recording starts.

To stop recording

Press p.

To check the order

Press CHECK on the remote repeatedly. After

the last track, "CHECK END" appears.

To cancel Program Edit

Press PLAY MODE repeatedly until

"PROGRAM" or "SHUFFLE" disappears

from the display.

Tip

When you want to reduce the hiss noise in low-level

high-frequency signals, press DOLBY NR so that

"DOLBY NR" appears after pressing CD SYNC.

Selecting tape length

automatically

—Tape Select Edit

You can check the most suitable tape length

for recording a CD. Do the following steps

before recording.

Insert a CD.

Press FUNCTION repeatedly until

"CD" appears in the display.

Press EDIT once, so that "EDIT"

flashes.

The required tape length for the

currently selected CD appears, followed

by the total playing time for side A and

side B respectively.

Notes

• You cannot use Tape Select Edit for discs

containing over 20 tracks.

• You cannot use this function after programming.

In order to use this function, you must first cancel

the program by pressing PLAY MODE repeatedly

until "PROGRAM" or "SHUFFLE" disappears

from the display.