Sony MHC-RG310 사용 설명서 - 페이지 12
{카테고리_이름} Sony MHC-RG310에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-RG310 40 페이지. Mini hi-fi component system
Sony MHC-RG310에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지)
페이지 인쇄
Creating your own
program
— Program Play
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programmed tracks
onto a cassette tape (page 17).
MP3 audio tracks cannot be played on
MHC-GX25 and MHC-RG220 (except for
European and Russian models).
Using the display window
1
Press CD.
2
Press PLAY MODE in stop mode
repeatedly until "PGM" appears.
3
Press D.SKIP (or DISC 1 – 3 or DISC
SKIP/EX-CHANGE on the unit) to select
a disc.
To program all the tracks on a disc at once,
proceed to step 5 with "AL" displayed.
4
Press . or > repeatedly until the
desired track number appears.
When programming an MP3, press
ALBUM – or + to select album, then press
. or > repeatedly until the desired
track number appears.
Disc tray number
5
Press ENTER.
The track is programmed.
The program step number appears,
followed by the total playing time.
GB
12
Selected track number
Total playing time
(including selected track)
6
Program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on
other discs
7
Press N.
Program Play starts.
Other operations
To
Do this
Cancel Program
Press PLAY MODE in stop
Play
mode repeatedly until "PGM"
disappears.
Clear a track from
Press CLEAR in stop mode.
the end
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD,
then press N. However, the program is cleared
when you open the disc tray.
• "– –.– –" appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 audio track.
Repeat steps
3 and 5
4 and 5
3 to 5