Sony MHC-RG441 사용 설명서 - 페이지 31

{카테고리_이름} Sony MHC-RG441에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-RG441 48 페이지. Sony operating instructions owner's record mini hi-fi component system mhc-gx750, gx450, gx250, mhc-rg555, rg551s, rg444s, rg441, rg333, rg222, rg221, rg121, rg100, mhc-rx550
Sony MHC-RG441에 대해서도 마찬가지입니다: 사용 설명서 (47 페이지)

페이지 인쇄

Connect the transmitter to a wall outlet

using the supplied AC power adaptor.

The transmitter automatically turns on.

to DC IN 9V jack

AC power adaptor

(supplied: AC-GSX100)

Notes

• When you connect the transmitter to the analog out

jacks, do not set the NOISE FILTER to ON.

Otherwise, the volume will be limited.

• The NOISE FILTER effects the sound only when

you connect an optional component to the AUDIO

IN A jacks of the transmitter. Connecting to the

AUDIO IN B jack, the switch has no effect.

• If stereo mini jack is connected to LINE OUT and the

NOISE FILTER is set to ON, audio output will be

reduced and audio signal may be intermittent or auto

muting will activate. In this case, set the NOISE

FILTER to OFF.

• When the transmitter is placed on or near a TV, it

may pick up a noise. In such case, place the

transmitter away from the TV.

• Do not place the transmitter near a fluorescent lamp,

etc. when using the system.

• Use only the supplied AC power adaptor. Do not use

any other AC power adaptor.

Polarity of the plug

• If the connected component has the AVLS

(Automatic Volume Limiter System) function, be

sure to turn off the function when using the

transmitter. Otherwise, you will have to turn up the

volume of the speaker, and that may cause distortion.

• If the connected component has the BASS BOOST

or MEGA BASS function, be sure to turn off the

function when using the transmitter. Otherwise, the

sound from the speaker may be distorted.

Transmitter

to wall outlet

The effective areas of the

transmitter

Wireless system that allows you to use your

system free from the restriction of speaker cords.

The optimum signal reception range is up to

approximately 30.5 m (100 feet) without the

system picking up some interference. However,

the distance may be reduced according to the

surroundings and environment. If the system

picks up some noise while using it within the

above mentioned distance, reduce the distance

between the transmitter unit and the main unit,

or select another channel.

Notes

• When you use the main unit inside the effective areas

of the transmitter, the transmitter can be placed in

any direction from the listener.

• Even within the signal reception area, there are some

spots (dead spot) where the RF signal cannot be

received. This is a characteristic inherent to RF

signals, and does not indicate a malfunction. By

slightly moving the transmitter, the location of the

dead spot can be changed.

Notes on receiving performance

This system component utilizes very high frequency

signals in the 900 MHz band so the receiving

performance may deteriorate due to the surroundings.

The following examples illustrate conditions that may

reduce the possible receiving range or cause

interference with reception.

– Radio waves generated such as cellphones and

cordless phone systems or metal instruments are

placed on the unit.

– Inside a building with walls containing steel beams.

– Area with many steel file cabinets, etc.

– Area with many electrical appliances capable of

generating electromagnetic noise.

– Transmitter is placed on a metal instrument.

– Area facing roadways.

– Noise or interfering signals exist in the surroundings

due to radio transceivers in trucks, etc.

– Noise or interfering signals exist in the surroundings

due to wireless communication systems installed

along roadways.

– Transmitter is placed directly on floor.

Placing it up off the floor, such as on a desk, is

recommended.

continued