Sony MHC-RX33 사용 설명서 - 페이지 22
{카테고리_이름} Sony MHC-RX33에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-RX33 32 페이지. Micro & mini shelf systems: component for mhcrx33
Sony MHC-RX33에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지)
페이지 인쇄Recording CDs by specifying the
track order (continued)
Selecting tape length
automatically
—Tape Select Edit
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing over 20
tracks.
2
4,7 3,6
1
Place a CD on the disc tray.
If the disc number you want to record is
not displayed, press DISC SKIP
repeatedly so that it appears.
2
Press EDIT.
The required tape length for the
currently selected CD appears, followed
by the total playing time for sides A and
B respectively.
22
1
DISC SKIP
5,8
3
Press p 6 and insert a blank tape in
deck A.
4
Press r on deck A.
Recording starts.
5
Press CD (P.
The CD player starts playing the tracks
to be recorded on side A.
When the last track for side A finishes
playing, the CD player changes to
playing pause automatically.
6
Remove the tape from deck A, and
insert it again with the side B facing
forward. Then rewind the tape
completely.
7
Press r on deck A.
Recording starts for side B.
8
Press CD (P.
The CD player starts playing the tracks
to be recorded on side B.
Note
You cannot use this function after programming.
In order to use this function, you must first erase the
program (see "Clear the entire program" in the table
on page 20).