Sony MHC-RX90 사용 설명서 - 페이지 8
{카테고리_이름} Sony MHC-RX90에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-RX90 50 페이지. Mini hi-fi component system
페이지 인쇄
Step 3: Presetting radio stations
(continued)
2
Press TUNING MODE repeatedly to
select "AUTO".
3
Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo programme) appear.
AUTO
4
Press TUNER MEMORY.
A preset number appears in the display.
AUTO
5
Turn the jog dial to select the preset
number you want.
6
Press ENTER/NEXT.
The station is stored.
7
Repeat steps 1 to 6 to store other
stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly to select
"MANUAL" in step 2, then turn the jog dial
to tune in the station.
To change the preset number
Start over from step 1.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
8
TUNED
STEREO
VOLUME
MHz
Preset number
TUNED
STEREO
VOLUME
Connecting optional
AV components
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting.
Connecting an MD deck for digital
recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck