Sony MHC-VX333 사용 설명서 - 페이지 11
{카테고리_이름} Sony MHC-VX333에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-VX333 40 페이지. Sony operating instructions mini hi-fi component system mhc-vx333/vx222
페이지 인쇄
To
Do this
Switch to CD
Press DISC 1 – 3 (Automatic
function from
Source Selection). However, if a
another source
CD is used in a program, play does
not start even if you press CD 1 –
3.
Remove a CD
Press Z OPEN/CLOSE.
Exchange other
Press DISC SKIP EX-CHANGE.
CDs while
playing
Play repeatedly
Press REPEAT during play until
(Repeat Play)
"REPEAT" or "REPEAT 1"
appears.
REPEAT*
the CD up to five times.
REPEAT 1*
only.
To cancel playing repeatedly, press
REPEAT until "REPEAT" or
"REPEAT 1" disappears.
1
*
You cannot select "REPEAT" and "SHUFFLE
ALL DISCS" at the same time.
2
*
When you select "REPEAT 1", that track is
repeated endlessly until REPEAT 1 is canceled.
Playing a track by entering the track
number
Press the number button(s) on the remote to
enter the track number of the track you want to
play.
To enter a track number over 10
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To play track number 30, press >10, then 3 and
10/0.
1
: For all the tracks on
2
: For a single track
Programing CD tracks
–– Program Play
You can make a program of up to 32 tracks
from all the CDs in the order you want to play
them.
1
Press CD, then place a CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the display.
3
Press one of DISC 1 – 3 to select a CD.
To program all the tracks on a CD at once,
proceed to step 5 with "AL" displayed.
4
Press . or > until the desired
track appears in the display.
Total playing time
(including selected track)
Disc tray number
Track number
5
Press ENTER.
The track is programed. The program step
number appears, followed by the total
playing time.
6
Program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on other
discs
Repeat steps
3 and 5
4 and 5
3 to 5
continued
11