Sony MHC-VX333 사용 설명서 - 페이지 19

{카테고리_이름} Sony MHC-VX333에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MHC-VX333 40 페이지. Sony operating instructions mini hi-fi component system mhc-vx333/vx222

페이지 인쇄

Tuner

Presetting radio stations

You can preset up to 20 stations for FM and 10

stations for AM.

Press TUNER/BAND repeatedly to

select "FM" or "AM".

Press and hold + or – (or TUNING + or –

on the remote) until the frequency

indication starts to change, then

release it.

Scanning stops automatically when the

system tunes in a station. "TUNED" and

"STEREO" (for a stereo program) appear.

Press TUNER MEMORY.

A preset number appears in the display.

The stations are stored from preset number

Press ENTER.

"COMPLETE" appears.

The station is stored.

Repeat steps 1 to 4 to store other

stations.

To tune in a station with a weak

signal

Press + or – (or TUNING + or – on the remote)

repeatedly in step 2 to tune in the station

manually.

Preset number

To set another station to an existing

preset number

Start over from step 1. After step 3, press .

or > (or PRESET – or + on the remote)

repeatedly to select the preset number you want

to store the other station.

You can preset a new station in the selected

preset number.

To erase a preset station

Press and hold TUNER MEMORY until a

preset number appears in the display.

Press . or > (or PRESET – or + on

the remote) repeatedly to select the preset

number you want to erase.

Select "ALL ERASE" when you want to

erase all the preset stations.

Press ENTER.

"COMPLETE" appears.

When you erase a preset number, the preset

number decreases by one and all preset

numbers following the erased one are

renumbered.

To change the AM tuning interval

(except for the Middle Eastern and

Philippine models)

The AM tuning interval is factory-set to 9 kHz

(10 kHz in some areas). To change the AM

tuning interval, tune in any AM station first,

then turn off the system. While holding down

ENTER, turn the system back on. When you

change the interval, all the AM preset stations

are erased. To reset the interval, repeat the

same procedure.

Tip

The preset stations are retained for half a day even if

you unplug the power cord or if a power failure

occurs.

Note

You cannot change the AM tuning interval in the

Power Saving Mode.