Sony NAS-SV20i 빠른 설정 매뉴얼

{카테고리_이름} Sony NAS-SV20i에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony NAS-SV20i 2 페이지. Network audio remote controller
Sony NAS-SV20i에 대해서도 마찬가지입니다: 사양 (2 페이지), 지침 및 운영 매뉴얼 (14 페이지)

페이지 인쇄
Sony NAS-SV20i 빠른 설정 매뉴얼
Network Audio System/Server

Quick Setup Guide

for wireless networks and access to Internet services
This Quick Setup Guide explains how to connect this NAS-SV20i/SV20Di Network Audio System/
Server to your wireless home network, and how to use the functions that can be used over a wireless
network.
Server (PC)
Stream audio content
Home Network
Listening to music services
You can listen to various music services offered on the Internet.
Listening to music stored on your server (PC)
You can listen to audio content stored on a server (PC) that supports DLNA standards
via your home network.
©2010 Sony Corporation Printed in China
1
Before you start using the unit

Insert batteries into the remote control.

Connect the AC adaptor and the power cord.
To a wall
outlet
Power cord
AC adaptor
Tip
DLNA is an abbreviation for Digital Living Network Alliance. It is the name of an organization that establishes guidelines
(DLNA guidelines), and it is also the name of the method that allows devices in a house to share digital content (such as
music data, image data, etc.) over a home network. The unit complies with the DLNA standard. You can listen to music
in various ways using the unit together with other DLNA-compliant devices.
4-192-582-11(1)
NAS-SV20i/SV20Di
Music Services
DLNA player
Play audio content stored
on a server (PC)
Wireless LAN router/
access point
R6 (size AA)  2
The unit
To the DC IN
19.5 V jack
2

Performing initial setup operations

When the unit is turned on for the first time after you purchase it, some basic setup operations are required
(making the network settings, the clock settings, obtaining a list of available music services, and other
internal settings).
To make the network settings, the access point scan method is introduced in this guide.
 For details on network connection methods other than the access point scan method:
 "Connecting the unit to your home network (network settings)" in the Operating Instructions
Check the following information in advance:
You will be required to select or enter the following information when you make the network settings.
Check the following information in advance and record them in the space provided below.
Network name (SSID)*:
Security key (WEP key, WPA/WPA2 key)*:
* This information should be available from a label on your wireless LAN router/access point, from the operating manual, from the
person who set up your wireless network, or from the information provided by your Internet service provider.
1
Press   (power).
1
It may take a while (several tens of seconds) before the unit turns on.
 When "Set the items required to use this unit. Press ENTER to continue. "
6
appears, press ENTER. (When "
continued to the next page. Press  to see the entire text string.)
 When the "Start setup?" display appears, press / to select "OK, " then
1-9
press ENTER.
2
When "Network Settings" appears, press ENTER.
3
Select "Wireless LAN. "
4
Select "Access Point Scan. "
The unit displays a list of network names (SSIDs) of available access points.
5
Select the network name (SSID) from the list.
6
Enter the security key (WEP Key, WPA/WPA2 Key) of your
network, and press ENTER.
Follow the steps below to enter characters and numbers.
1
Press CHARACTER repeatedly to select the type of characters and
numbers (select "abc" for entering lowercase letters of the alphabet
and numbers, "ABC" for uppercase letters of the alphabet and
2
numbers, and "123" for numbers only).
1
2
Press the corresponding numeric/text button to enter the desired
character or number, then press  to move the cursor to the next
2
input position.
3
Repeat this operation to enter the text string.
3
Press ENTER to confirm and save the text string.
7
When "Save settings and check connection. Press ENTER
to continue. " appears, press ENTER.
Press / to see the entire text string.
It may take a while for the unit to complete the network settings.
When the network settings have been completed, "Complete. " appears.
8
When the "Date&Time" display appears, select "Auto. "
Select the city where the unit is being used from "Time Zone, " press ENTER
when the "NTP Server" display appears (you can use the factory set NTP
server setting), then follow the instructions that appear on the display.
For details on how to set the clock (including how to make manual settings),
refer to the Operating Instructions.
9
When the "Get Service List" display appears, select "OK. "
When the service list for the Music Services function is obtained,
"Refreshed Service List. " appears, then the unit starts making other internal
settings automatically.
When the initial setup process has been completed, "Setup is complete. "
appears.
" appears on the display, the text is
Continued 