Sony NAS-Z200IR 설정 매뉴얼
{카테고리_이름} Sony NAS-Z200IR에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony NAS-Z200IR 2 페이지. Wireless network audio system
페이지 인쇄
Setup Guide
Wireless Network Audio System
NAS-Z200DiR/Z200iR
© 2009 Sony Corporation Printed in China
Thank you for purchasing the Sony NAS-Z200DiR/Z200iR Wireless Network Audio System.
You can now enjoy listening to the music from various sources, such as a computer, Internet
radio, iPod, etc. To listen to the music stored on your computer with this unit, install the
supplied VAIO Media plus server software on your computer, and connect the unit and your
computer through a wireless network.
This Setup Guide explains how to connect the unit to your home network and how to perform
basic operations.
Please read the following first:
To listen to the music stored on your computer with this unit, you will need the following
environment and information.
A wireless home network that can access the audio data on your computer.
Internet access to connect to Internet radio from your home network.
The network name (SSID)* that identifies your wireless network.
Confirmation about whether security measures for your wireless home network have
been applied or not.
If your wireless home network is secured by encryption, the network key (security key)*
for your network.
* E.g., password for your network, WEP key, WPA key, or WPA2 key.
This information could be available from a label on your wireless router/wireless LAN access point or
in the operating manual. You may need to refer to the person who set up your wireless network or to
information provided by your Internet service provider.
Wireless router
Wireless LAN
Router
access point
1
Checking the supplied
accessories
Remote control (1)
Remote control charger (1)
AC power adaptor (1)
AM loop antenna (1)
For models except the UK model
For the UK model
FM wire antenna (1)
DAB wire antenna (1) (for
VAIO Media plus
the UK model only)
CD-ROM (1)
Do not play this disc on an
audio CD player.
Operating Instructions (1)
This manual provides full explanations of the various settings, operations and the network
connection procedure. This manual also contains precautions for the safe use of the unit.
Setup Guide (this manual)
"Internet Radio service on NAS-Z200DiR/Z200iR" leaflet (1)
2
4-151-739-11(1)
Connecting the antennas and power cord (main unit)
WARNING
DO NOT plug the power
cord into a wall outlet
until the following steps
to are completed.
Connect the AM loop antenna (aerial).
Connect the FM wire antenna (aerial).
On the unit
When using an external antenna
FM wire antenna
Connect the DAB wire antenna (aerial) (for the UK model only).
Internet
DAB wire antenna
Connect the power cord to a wall outlet.
3
Connecting the AC power adaptor (remote control)
Connect one end of the AC power adaptor to the DC IN jack
of the charger and the other end to a wall outlet.
Place the remote control on the charger.
CHARGE
indicator
When you place the remote control on the charger,
the CHARGE indicator lights up and charging
starts. The CHARGE indicator turns off when the
remote control is fully charged.
DAB wire antenna
To a wall outlet
FM wire antenna
AM loop antenna
Locate the antenna away from the unit and other AV equipment.
Adjust the location and angle for good AM reception.
External
Adjust the location and angle for good FM reception.
antenna
If preferred, use a commercially available 75 coaxial cable to connect the unit to an external antenna to
improve reception.
Ensure the antenna is fully extended.
Use an external DAB antenna (aerial) for a more robust DAB signal. It is recommended you only use the
supplied DAB wire antenna for areas of strong DAB reception or as a temporary measure until you install
an optional external antenna.
Use a 75
coaxial cable with male F type connector to connect the unit to an external antenna.
Ensure the antenna is fully extended.
After charging has completed and before using the unit, set the display language and the
clock.
Selecting the display language
1
Press (power) to turn on the unit.
2
Press HOME to display the Home menu.
3
Press /// to select [Settings], and then press ENTER.
4
Press / to select [Remote Control] – [Language], and then press ENTER.
To a wall outlet
5
Press / to select the desired language, and then press ENTER.
The display appears in the selected language.
Setting the clock
1
Press HOME to display the Home menu.
2
Press /// to select [Settings], and then press ENTER.
3
Press / to select [Common Setting] – [Clock Setting], and then press ENTER.
"0:00" appears in the display.
4
Press / to select [Change], and then press ENTER.
5
Press / to set the hour, and then press ENTER.
A 24-hour clock is used for the time display.
6
Press / to set the minute, and then press ENTER.
7
Press / to select [OK], and then press ENTER.
4
Playing a CD
The unit can play audio CDs and CD-R/RW discs recorded with MP3 audio tracks.
For further details of the CD function, refer to the operating instructions.
+/–
HOME
////
ENTER
Press (power) to turn on the unit.
Press HOME to display the Home menu.
Press /// to select [CD] and press ENTER to enter
the CD function.
Insert a disc in the disc slot.
Insert a disc with
the label side
facing forward.
Disc slot
When you insert a disc, playback starts automatically.
Press +/– to adjust the volume.
To stop playing
Press .
To change tracks
Press /.
To eject a disc
Press on the main unit.
5
Listening to an FM/AM/
DAB* radio station
HOME
////
ENTER
Press HOME to display the Home menu.
Press /// to select [Tuner], and then press
ENTER.
Press / to select [FM], [AM], or [DAB]*, and then
press ENTER.
If you select [DAB], DAB Automatic Scan starts. When scanning is completed,
a list of available DAB stations is created.
Press / to select a station.
Scanning stops automatically when a station is turned in, and then "Tuned"
and "Stereo" (for stereo reception only) appear in the display.
* For the UK model only