Sony RCD-W2000ES - Cd/cdr Recorder 사용 설명서 - 페이지 19
{카테고리_이름} Sony RCD-W2000ES - Cd/cdr Recorder에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony RCD-W2000ES - Cd/cdr Recorder 44 페이지. Limited warranty (es products)
Sony RCD-W2000ES - Cd/cdr Recorder에 대해서도 마찬가지입니다: 제한 보증 (1 페이지)
페이지 인쇄
Creating Your Own
Program (Program Play)
You can specify the playback order of the
tracks and MP3 files on a disc to create your
own programs containing up to 25 steps.
When using the remote, set DECK A/DECK B
to DECK A to operate DECK A, or to DECK B
to operate DECK B.
DISC 1-5 A
ALBUM
CLEAR
N
x
PLAY MODE
AMS
DECK A/DECK B
PLAY MODE
H
./>
DISC SKIP
1
While the unit is stopped, press PLAY
MODE repeatedly until "PGM" lights up
in the display.
2
For DECK A, press one of the DISC 1-5
buttons (or DISC SKIP on the remote)
to select the desired disc number.
3
Turn AMS (or press ./> on the
remote) to select the desired track
number, then press AMS (or PLAY
MODE).
To program MP3 files, press ALBUM until
ALBUM SELECT indicator in the display
lights up, then turn AMS (or press ALBUM
+/– on the remote) to select the desired
album title.
PLAY MODE
N
x
AMS
CLEAR
x
ALBUM +/–
Press ALBUM until ALBUM SELECT
indicator in the display turns off, turn AMS
(or press ./> on the remote) to select
the desired track number, then press AMS
(or PLAY MODE).
4
To program additional tracks, repeat
step 3 (steps 2 to 3 for DECK A).
5
Press N (or H on the remote) to start
Program Play.
The unit starts playing tracks in the
programmed order.
To program all tracks on the
selected disc or album (DECK A
only)
After displaying the first track number in step
3, turn AMS counterclockwise (or press .
on the remote) to select "AL" instead of a track
number. (You cannot program all tracks on the
disc for MP3 files.)
To stop Program Play
Press x.
To cancel Program Play
While the unit is stopped, press PLAY MODE
repeatedly until "PGM" goes off.
To erase the last programmed track
While the unit is stopped, press CLEAR. (Press
CLEAR on the remote for DECK A.) Each
time you press the button, the last programmed
track is erased.
Tips
• You can also select the track number using the
number buttons on the remote in step 3 above.
• The program remains even after Program Play ends.
When you press N (or H on the remote), you can
play the same program again.
• To check the total number of the programmed
tracks, press TIME while the unit is stopped.
Notes
• You cannot create a program containing tracks from
both DECK A and DECK B.
• "Step Full!" appears in the display when you
program over 25 steps. Erase the unnecessary tracks
to enter other tracks.
• The program is erased when you turn the unit off.
• If the total time of the program exceeds 99 minutes
59 seconds, "--.--" appears in the display.
• You cannot change the PLAY MODE during
playback.
• If you program an MP3 track, "--.--" appears in the
display. (The total playing time does not appear for
MP3 files.)
19