Sony RCD-W222ES - Cd/cdr Recorder 사용 설명서 - 페이지 21
{카테고리_이름} Sony RCD-W222ES - Cd/cdr Recorder에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony RCD-W222ES - Cd/cdr Recorder 32 페이지. Limited warranty (es products)
Sony RCD-W222ES - Cd/cdr Recorder에 대해서도 마찬가지입니다: 사양 (2 페이지), 제한 보증 (1 페이지), 사용 설명서 (34 페이지)
페이지 인쇄
Adjusting the Recording
Level
Adjusting the recording level
for digital recording
You can adjust the recording level using the
Setup Menu. (For details of "Using the Setup
Menu," see page 28.)
When using the remote, set SELECT to CDR.
SELECT
MENU/NO
./>
1
Do Steps 1 to 4 of "Recording on a CD-
R or CD-RW Manually" on page 20.
2
Play the portion of the sound source
with the strongest signal level.
3
Press MENU/NO.
4
Turn AMS (or press ./> on the
remote) to select the program source.
To select
DECK A
a component connected to
the DIGITAL OPTICAL
IN jack
a component connected to
the DIGITAL COAXIAL
IN jack
5
Press AMS (or YES).
MENU/NO
AMS
REC LEVEL
YES
Display
DECK A Lvl
Optical Lvl
Coaxial Lvl
6
While monitoring the sound, turn AMS
(or press ./> on the remote) to
adjust the recording level, then press
AMS (or YES).
Adjust the recording level within a range of
–
to +18 dB, so that the OVER indication
of the peak level meters does not light up in
red.
OVER indication
TOC
DECK B
CD TEXT
CD - RW
7
Press MENU/NO.
8
Stop playing the sound source.
9
To start recording, do Steps 6 and 7 of
"Recording on a CD-R or CD-RW
Manually" on page 20.
Note
You cannot change the setting of the DIGITAL
OPTICAL or DIGITAL COAXIAL output level even
if you adjust the recording level for digital recording.
Adjusting the recording level
for analog recording
Turn the REC LEVEL control on the front
panel. Adjust the recording level so that the
OVER indication on the peak level meters does
not light up.
Note
You can adjust the recording level while recording,
not while playing a disc in DECK B.
OVER
21