Sony RCD-W222ES - Cd/cdr Recorder 사용 설명서 - 페이지 8
{카테고리_이름} Sony RCD-W222ES - Cd/cdr Recorder에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony RCD-W222ES - Cd/cdr Recorder 32 페이지. Limited warranty (es products)
Sony RCD-W222ES - Cd/cdr Recorder에 대해서도 마찬가지입니다: 사양 (2 페이지), 제한 보증 (1 페이지), 사용 설명서 (34 페이지)
페이지 인쇄
Basic Operations
Playing a CD
This unit has two decks.
In this manual, the CD player section is just
called DECK A, and the CD-R and CD-RW
recording section is called DECK B.
When using the remote, set SELECT to CD for
operations on DECK A (the CD player
section), or to CDR for operations on DECK B
(the CD-R or CD-RW recording section).
POWER
DISC 1-5 A
N
x
AMS
X
PLAY MODE
1
Turn on the amplifier and adjust the
volume to the minimum.
2
Set the function of the connected
amplifier with its input selector.
3
Press POWER.
4
Press OPEN/CLOSE (or one of the DISC
1-5 A buttons for DECK A) and place a
disc on the inner circle of DECK A (or
B). Press OPEN/CLOSE (or A) again to
close the disc tray.
With the label side up
5
For DECK A, press PLAY MODE
repeatedly to select the Continuous
play mode.
When you
The unit plays
select
ALL DISCS
All discs in the unit consecutively
in the order of the disc number.
1 DISC
Only one disc you have selected.
8
OPEN/CLOSE
AMS
X
N
x
6
Press N (or
on the remote).
H
The unit starts playing. Adjust the volume on
the amplifier.
To
Do the following:
Stop playback
Press x.
Pause playing
Press X. Press the button again or
N (or
press
to resume playing.
Select the disc
Press one of the DISC 1-5
(for DECK A)
buttons.*
Go to the next disc
Press D. SKIP on the remote.
(for DECK A) Z
Go to the next
Turn AMS**clockwise (or press
track
> on the remote ).
Go to the beginning
Turn AMS counterclockwise (or
of the current track
press . on the remote).
or the preceding
track
Remove the disc
OPEN/CLOSE (or A)
Press
whichever contains the disc you
want to remove after stopping
play.
*
When the disc is in the unit, the indicator lights up
in orange, then it turns green when the disc is selected.
**AMS: Automatic Music Sensor
Tips
• You can start playing with the track selected in Step 6.
1 Turn AMS (or press ./> or the number
buttons on the remote) to select the track you
want to play using the display*.
2 Press N (or
H
on the remote).
*See "Using the Display" on page 9.
• You can remove or load discs while playing the
other deck. Press OPEN/CLOSE (or A) of the deck
that is not currently playing to open that tray, and
remove or load a disc.
• The DISC 1-5 button indicator lights up when the
disc is in the tray. The indicator turns to green when
the disc is selected.
• You can connect a headphone to the PHONE jack
on the front panel. Turn the PHONE LEVEL
control to adjust the volume.
• You can replace any discs in the other disc trays
while playing a disc in DECK A. Press OPEN/
CLOSE (or A) of the deck that is not currently
playing to open that tray, and remove or load a disc.
Notes
• You can play unfinalized CD-Rs or CD-RWs only
in DECK B. For the detailed explanation about
finalizing, see "Finalizing a CD-R or CD-RW" on
page 24.
• Do not leave the disc tray open when the unit is not
in use to prevent dust and dirt from entering and
prevent damage to the disc tray.
• When you turn on the unit, you will hear some
mechanical noise from the unit. This is not a
malfunction.
H
on the remote)
,