Sony RG333 사용 설명서 - 페이지 17

{카테고리_이름} Sony RG333에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony RG333 48 페이지. Sony operating instructions owner's record mini hi-fi component system mhc-gx750, gx450, gx250, mhc-rg555, rg551s, rg444s, rg441, rg333, rg222, rg221, rg121, rg100, mhc-rx550

페이지 인쇄

Listening to non-preset radio

station

— Manual Tuning

Press TUNER BAND (or FUNCTION

repeatedly) to switch the function to

tuner.

Press TUNER BAND repeatedly to

select "FM" or "AM".

Press TUNING MODE repeatedly until

"AUTO" and "PRESET" disappear from

the display.

Press – or + (or TUNING – or + on the

unit) repeatedly to tune in the desired

station.

Tips

• To improve broadcast reception, adjust the supplied

antennas, or connect a commercially available

external antenna.

• When an FM stereo program has static noise, press

FM MODE repeatedly until "MONO" appears.

There will be no stereo effect, but the reception will

improve.

• Press TUNING MODE repeatedly until "AUTO"

appears in step 3 above, then press – or + (or

TUNING – or + on the unit). The frequency

indication changes and scanning stops when the

system tunes in a station (Automatic Tuning).

• To record the radio programs, use manual recording

(page 20).

Using the Radio Data

System (RDS)

(European model only)

What is the Radio Data

System?

Radio Data System (RDS) is a broadcasting

service that allows radio stations to send

additional information along with the regular

program signal. RDS is available only on FM

stations.*

Note

RDS may not work properly if the station you are tuned

in is not transmitting the RDS signal properly or if the

signal is weak.

* Not all FM stations provide RDS service, nor do they

provide the same types of services. If you are not

familiar with the RDS system, check with your local

radio stations for details on RDS services in your

area.

Receiving RDS broadcasts

Simply select a station from the FM band.

When you tune in a station that provides RDS

services, the station name appears in the display.

To check the RDS information

Each time you press DISPLAY, the display

changes cyclically as follows:

t Preset number

Station name

frequency t Clock display t Effect status

If the RDS broadcast is not properly received, the

station name may not appear in the display.

Preset number is displayed only if you preset radio

stations (page 15).

and