Sony SA-NS400 사용 설명서 - 페이지 18
{카테고리_이름} Sony SA-NS400에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SA-NS400 40 페이지. Wireless network speakers
Sony SA-NS400에 대해서도 마찬가지입니다: 지침 및 운영 매뉴얼 (14 페이지), 빠른 시작 매뉴얼 (2 페이지), 사양 (4 페이지), 제한 보증 (1 페이지), 빠른 설정 (2 페이지), 특징 (2 페이지), 사용 설명서 (45 페이지), 빠른 시작 매뉴얼 (2 페이지)
8
Select [PIN method], then click
[Start].
An eight-digit number (PIN code)
appears on the screen.
9
Enter the unit's PIN code in the
wireless LAN router/access
point.
Tip
Refer to the operating instructions for details
on the wireless LAN router/access point.
10
Click [OK] on the PIN code
screen that is displayed in step
8.
Disconnect the network (LAN) cable,
etc., following the on-screen instructions.
The unit restarts automatically, then the
LINK indicator lights up in green when
the connection is made.
Note
Perform the process again from step 1 when the
LINK indicator flashes in red.
Tip
You can also select the WPS push button
configuration method in step 8.
18
GB
Setting Up Wired
Networks
Option 4: DHCP method
Usually, the DHCP setting is set to ON when
you connect your computer to the network.
Try the following method if you are using a
wired network.
Set the DHCP setting of your computer to ON
in advance.
1
Check whether your computer
and router are turned on.
2
Connect the unit and the router
using a network (LAN) cable.
3
Connect the router and your
computer using a second
network (LAN) cable.
Network (LAN) cable
(not supplied)
Network
(LAN) cable
4
Turn the unit on.
The LINK indicator lights up in amber
when the connection is made.
Option 5: Fixed IP method
Your computer must be connected to the
router in advance.
1
Set the DHCP setting of your
computer and the router to ON.
2
Connect the router and the unit
using a network (LAN) cable.