Sony SA-NS400 사용 설명서 - 페이지 35

{카테고리_이름} Sony SA-NS400에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SA-NS400 40 페이지. Wireless network speakers
Sony SA-NS400에 대해서도 마찬가지입니다: 지침 및 운영 매뉴얼 (14 페이지), 빠른 시작 매뉴얼 (2 페이지), 사양 (4 페이지), 제한 보증 (1 페이지), 빠른 설정 (2 페이지), 특징 (2 페이지), 사용 설명서 (45 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Audio content has changed/started/

stopped automatically.

• The unit may be under the control of

another device. If you want to reject these

requests, set the power switch of this unit

to OFF.

The sound skips.

• The sound may skip depending on the

network environment, etc., when you use a

wireless network.

• The servers are overloaded. Close all

unneeded applications you are currently

using.

This unit cannot play back with this

error indicated (illumination indicator

(white) continues flashing quickly).

• Make sure that the audio content is not

corrupted or has not been deleted from the

server. Refer to the operating instructions

of the server.

• The servers is trying to play back an

unsupported audio format on this unit.

Check the format information using the

server.

• Deactivate the multicast control of your

wireless LAN router/access point if it is

activated. Refer to the operating manual of

your wireless LAN router/access point for

details.

This unit cannot play back with this

indicated (illumination indicator (white)

continues flashing).

• The server may not permit access from this

unit. Change the settings of the server to

permit access from this unit. Refer to the

operating instructions of the server.

The X (pause) button does not work.

• The X (pause) button may not work,

depending on the server.

BOOKMARKS

Refer to "Home Network" (page 34) if the

problem does not apply to one of the following

cases.

Playback does not start after pressing

the BOOKMARKS CALL button.

• Make sure the LINK indicator is lighting

up in green or amber. Refer to "The unit

cannot connect to the network. (The unit

cannot be found or recognized by other

devices that are on the home network.)"

(page 34) if the LINK indicator goes off,

flashes or lights up in red.

• Make sure the AUDIO IN indicator is not

lighting up.

The BOOKMARKS CALL button does

not work when the audio input is selected.

• The IP address of the server may have

been changed if playback will not start

when you press the BOOKMARKS

CALL button.

In this case, register the desired audio

content again.

The unit does not register the playback

audio content in the bookmark list

when you press the BOOKMARKS ADD

button.

• Make sure the PARTY STREAMING

indicator is not lighting up in amber. The

BOOKMARKS ADD button does not

work when you have joined a PARTY.

• You cannot register the same audio content

two or more times in a row.

Random play function