Sony SA-WCT290 서비스 매뉴얼 - 페이지 18

{카테고리_이름} Sony SA-WCT290에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SA-WCT290 42 페이지. Sound bar and active speaker system
Sony SA-WCT290에 대해서도 마찬가지입니다: 서비스 매뉴얼 (24 페이지)

페이지 인쇄
Sony SA-WCT290 서비스 매뉴얼
HT-CT290/CT291
Releasing method:
Touch the [
] touch key on the main unit or press the [
1
key on the main unit or press again the [
Action
MODE OUT SEQ1
AUTO
MODE OUT SEQ2
MODE OUT SEQ3
MODE OUT SEQ4
MODE OUT SEQ5
MODE OUT SEQ6
TIME OUT
Press POWER
RESET
DEMO MODE
The demo mode can be performed.
(This mode is used by shop front)
Procedure:
1. Touch the [
] touch key on the main unit to turn the power on.
1
2. Touch the [
] touch key and [−] touch key on the main unit simultaneously for fi ve seconds.
Or press the button on the remote commander as following order (each buttons press within 5 seconds).
[BACK] [ENTER] [INPUT] [
3. LED lights on from USB, TV, BT, MOVIE, and MUSIC. After that, all LED lights on and blinks 3 times.
4. The message "TV" appears on the screen display panel.
Releasing method:
Perform the "RESET".
Note: The demo mode will not release by unplug the AC cord.
USB UPDATE TEST MODE
To update micontroller software through USB.
Procedure:
1. Plug in USB device in power on condition.
2. Touch the [ ] touch key and [1] touch key on the main unit simultaneously for fi ve seconds.
3. The message "USB" appears.
4. If the updating progress succeeds, all LED lights on and the main unit will restart.
5. If the updating progress fails, all LED lights blink continuously.
18
] button on the remote commander to exit this mode. Touch again the [
1
] button on the remote commander and the LED lights will display as below table:
1
LED REACTION SPEC
USB
TV
BT
O
O
O
O
O
O
O
O
O
O
O
O
DISPLAY FUNCTION
. . . . .
. . . . .
. . . . .
*3*
*3*
*3*
] [INPUT] [
]
MOVIE
MUSIC
BT LED
O
O
O
. . . . .
. . . . .
. . . . .
*3*
*3*
*3*
] touch
1