Sony SHAKE-7 사용 설명서 - 페이지 25
{카테고리_이름} Sony SHAKE-7에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SHAKE-7 44 페이지. Mini hifi component system
페이지 인쇄
Tip
If pairing and the Bluetooth connection fail, do
the following.
– Relaunch "NFC Easy Connect" and move the
smartphone slowly over the N-Mark.
– Remove the case from the smartphone if using
a commercially available smartphone case.
Playing music from a
Bluetooth device
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP.
Check the following before playing
music:
– The Bluetooth function of the Bluetooth
device is turned on.
– Pairing has been completed.
x For a Bluetooth device
1
Press BLUETOOTH on the unit
to select Bluetooth function.
"BLUETOOTH" appears in the
display panel.
2
Establish connection with the
Bluetooth device.
The last connected Bluetooth device
will be connected automatically.
Perform the Bluetooth connection
from the Bluetooth device if the device
is not connected.
Once the connection is established, the
Bluetooth device name appears in the
display panel.
3
Press N.
Depending on the Bluetooth device,
– you may have to press N twice.
– you may need to start playback of an
audio source on the Bluetooth
device.
Notes
• When the system is not connected to any
Bluetooth device, the system will connect and
playback from the last connected Bluetooth
device automatically when you press N.
• If you try to connect another Bluetooth device
to the system, the current connected Bluetooth
device will be disconnected.
x For an NFC-compatible
smartphone
Touch the smartphone to the N-Mark on
the system to establish the Bluetooth
connection.
Start playback of an audio source on the
smartphone. For details on playback, refer
to the operating instructions of your
smartphone.
To disconnect the Bluetooth device
x For a Bluetooth device
Press BLUETOOTH on the unit.
"BLUETOOTH" appears in the display
panel.
Depending on the Bluetooth device, the
Bluetooth connection may be canceled
automatically when you stop playback.
x For an NFC-compatible
smartphone
Touch the smartphone to the N-Mark on
the system again.
Erasing all the pairing
registration information
Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth function.
"BLUETOOTH" appears in the
display panel.
If the system is connected to a
Bluetooth device, the Bluetooth device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth device.
GB
25