Sony SRS-BTX300 운영 지침
{카테고리_이름} Sony SRS-BTX300에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SRS-BTX300 2 페이지. Personal audio system
Sony SRS-BTX300에 대해서도 마찬가지입니다: 시작 매뉴얼 (2 페이지), 운영 지침 (2 페이지), 사용자 설명서 (2 페이지), 지침 및 운영 매뉴얼 (2 페이지)
페이지 인쇄
4-449-951-22(1)
Personal Audio System
Operating Instructions
Mode d'emploi
©2013 Sony Corporation Printed in China
SRS-BTX300
— Connect the equipment into an outlet on a circuit different
English
Personal Audio System
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician
Before operating the system, please read this guide
for help.
thoroughly and retain it for future reference.
Owner's Record
For the customers in the USA and Canada
The serial number is located on the inside of the side stand.
RECYCLING LITHIUM-ION BATTERIES
Record the serial number in the space provided below. Refer
to them whenever you call upon your Sony dealer regarding
Lithium-Ion batteries are recyclable.
this product.
You can help preserve our environment
Model No. SRS-BTX300
by returning your used rechargeable
batteries to the collection and recycling
Serial No. ________________________________
location nearest you.
For more information regarding
For customers in the USA
recycling of rechargeable batteries, call toll free
Please register this product on line at
1-800-822-8837, or visit http://www.rbrc.org/
http://www.sony.com/productregistration
Proper registration will enable us to send you
Caution:
Do not handle damaged or leaking Lithium-Ion
periodic updates about new products, services
and other important announcements. Registering
batteries.
your product will also allow us to contact you
in the unlikely event that the product needs
Precautions
adjustment or modification. Thank you.
Notes when using with a mobile phone
WARNING
For details on operation of your mobile phone when
receiving a telephone call while transmitting the sound
using the Bluetooth connection, refer to the operating
To reduce the risk of fire or electric shock, do not
instructions supplied with the mobile phone.
expose this apparatus to rain or moisture.
On safety
To reduce the risk of fire, do not cover the ventilation of the
apparatus with newspapers, tablecloths, curtains, etc. And do
Notes on the AC adaptor
not place lighted candles on the apparatus.
When connecting or disconnecting the AC adaptor, turn off
To reduce the risk of fire or electric shock, do not expose this
the system beforehand. Otherwise, it may cause
malfunction.
apparatus to dripping or splashing, and do not place objects
filled with liquids, such as vases, on the apparatus.
Use only the supplied AC adaptor. To avoid damaging the
system, do not use any other AC adaptor.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries
installed) to excessive heat such as sunshine, fire or the like for
Polarity of the plug
a long time.
Plug the AC adaptor into a nearby wall outlet (mains). In the
As the main plug of AC adaptor is used to disconnect the AC
case of a problem, unplug it from the wall outlet (mains)
adaptor from the mains, connect it to an easily accessible AC
immediately.
outlet. Should you notice an abnormality in it, disconnect it
Do not install the AC adaptor in a confined space, such as a
from the AC outlet immediately.
bookcase or built-in cabinet.
To reduce the risk of fire or electric shock, do not expose the
The unit is not disconnected from the AC power source
AC adaptor to dripping or splashing, and do not place
(mains) as long as it is connected to the wall outlet, even if the
objects filled with liquids, such as vases, on the AC adaptor.
unit itself has been turned off.
On placement
The nameplate and important information concerning safety
Do not set the speaker in an inclined position.
are located on the bottom exterior of the main unit and on the
Do not leave the system in a location near heat sources, or
surface of the AC adaptor.
in a place subject to direct sunlight, excessive dust,
moisture, rain or mechanical shock.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
On operation
to operate this equipment.
Do not insert any small objects, etc., into the jacks or
This equipment must not be co-located or operated in
ventilation hole on the rear of the system. The system may
conjunction with any other antenna or transmitter.
short out or malfunction.
This equipment complies with FCC/IC radiation exposure
On cleaning
limits set forth for an uncontrolled environment and meets
Do not use alcohol, benzine, or thinner to clean the cabinet.
the FCC radio frequency (RF) Exposure Guidelines in
Others
Supplement C to OET65 and RSS-102 of the IC radio frequency
(RF) Exposure rules.
If you have any questions or problems concerning this
This equipment has very low levels of RF energy that it
system that are not covered in this manual, please consult
deemed to comply without maximum permissive exposure
your nearest Sony dealer.
evaluation (MPE). But it is desirable that it should be installed
and operated keeping the radiator at least 20 cm or more
away from person's body (excluding extremities: hands, wrists,
What is Bluetooth
feet and ankles).
Wireless Technology?
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada.
Bluetooth wireless technology is a short-range wireless
To reduce potential radio interference to other users, the
technology that enables wireless data communication
antenna type and its gain should be so chosen that the
between digital devices, such as a computer and digital
equivalent isotropically radiated power (e.i.r.p.) is not more
camera. Bluetooth wireless technology operates within a range
than that necessary for successful communication.
of about 10 m.
Connecting two devices as necessary is common, but some
This device complies with Industry Canada license-exempt
devices can be connected to multiple devices at the same
RSS standard(s). Operation is subject to the following two
time.
conditions: (1) this device may not cause interference, and (2)
You do not need to use a cable for connection, nor is it
this device must accept any interference, including
necessary for the devices to face one another, such is the case
interference that may cause undesired operation of the
with infrared technology. For example, you can use such a
device.
device in a bag or pocket.
Important Safety Instructions
Bluetooth standard is an international standard supported by
thousands of companies all over the world, and employed by
1) Read these instructions.
various companies worldwide.
2) Keep these instructions.
Communication system and
3) Heed all warnings.
compatible Bluetooth profiles of the
4) Follow all instructions.
5) Do not use this apparatus near water.
system
6) Clean only with dry cloth.
Profile is standardisation of the function for each Bluetooth
7) Do not block any ventilation openings.
device specification. The system supports the following
Install in accordance with the manufacturer's instructions.
Bluetooth version and profiles:
8) Do not install near any heat sources such as radiators, heat
Communication System:
registers, stoves, or other apparatus (including amplifiers)
Bluetooth Specification version 3.0
Compatible Bluetooth Profiles:
that produce heat.
–
A2DP (Advanced Audio Distribution Profile): Transmitting
9) Do not defeat the safety purpose of the polarized or
or receiving audio content of high-quality.
grounding-type plug. A polarized plug has two blades
–
AVRCP (Audio Video Remote Control Profile): Controlling
with one wider than the other. A grounding type plug has
the volume.
two blades and a third grounding prong. The wide blade
–
HSP (Headset Profile): Talking on the phone/Operating the
or the third prong are provided for your safety. If the
phone.
–
HFP (Hands-free Profile): Talking on the phone/Operating
provided plug does not fit into your outlet, consult an
the phone by hands-free.
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
Maximum communication range
particularly at plugs, convenience receptacles, and the
Use Bluetooth devices within 10 m (line of sight) of the system.
point where they exit from the apparatus.
Maximum communication range may shorten under the
11) Only use attachments/accessories specified by the
following conditions.
manufacturer.
–
There is an obstacle such as a person, metal, or wall
12) Use only with the cart, stand, tripod, bracket, or table
between the system and Bluetooth device.
–
A wireless LAN device is in use near the system.
specified by the manufacturer, or sold with the apparatus.
–
A microwave oven is in use near the system.
When a cart is used, use caution when moving the
–
A device that generates electromagnetic radiation is in
cart/apparatus combination to avoid injury from tip-over.
use near the system.
Interference from other devices
Because Bluetooth devices and wireless LAN (IEEE802.11b/g)
use the same frequency, microwave interference may occur
and resulting in communication speed deterioration, noise, or
13) Unplug this apparatus during lightning storms or when
invalid connection if the system is used near a wireless LAN
unused for long periods of time.
device. In such a case, perform the following.
–
Use the system at least 10 m away from the wireless LAN
14) Refer all servicing to qualified service personnel. Servicing
device.
is required when the apparatus has been damaged in any
–
If the system is used within 10 m of a wireless LAN device,
way, such as power-supply cord or plug is damaged, liquid
turn off the wireless LAN device.
has been spilled or objects have fallen into the apparatus,
Interference to other devices
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Microwaves emitting from a Bluetooth device may affect the
operation of electronic medical devices. Turn off the system
WARNING
and other Bluetooth devices in the following locations, as it
Battery may explode if mistreated. Do not recharge,
may cause an accident.
–
where inflammable gas is present, in a hospital, train,
disassemble or dispose of in fire.
airplane, or a gas station
Dispose of used battery promptly, according to local
–
near automatic doors or a fire alarm
environmental laws and guidelines in force. Keep away from
children.
Notes
For the State of California, USA only
To be able to use the Bluetooth function, the Bluetooth
device to be connected requires the same profile as the
Perchlorate Material - special handling may apply, See
system's.
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material : Lithium battery contains perchlorate.
Note also that even if the same profile exists, devices may
vary in function depending on their specifications.
On Copyrights and Licenses
Due to the characteristic of Bluetooth wireless technology,
the sound played on the system is slightly delayed from the
The Bluetooth® word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sony
sound played on the Bluetooth device during talking on the
Corporation is under license.
telephone or listening to the music.
This system supports security capabilities that comply with
The N Mark is a trademark or registered trademark of NFC
Forum, Inc. in the United States and in other countries.
the Bluetooth standard to provide a secure connection
Android is a trademark of Google Inc.
when the Bluetooth wireless technology is used, but
iPhone is a trademark of Apple Inc., registered in the U.S. and
security may not be enough depending on the setting. Be
other countries.
careful when communicating using Bluetooth wireless
technology.
Other trademarks and trade names are those of their
respective owners.
We do not take any responsibility for the leakage of
information during Bluetooth communication.
NOTE
A device featuring the Bluetooth function is required to
conform to the Bluetooth standard specified by Bluetooth
This equipment has been tested and found to comply with the
SIG, and be authenticated. Even if the connected device
limits for a Class B digital device, pursuant to Part 15 of the
conforms to the above mentioned Bluetooth standard,
FCC Rules. These limits are designed to provide reasonable
some devices may not be connected or work correctly,
protection against harmful interference in a residential
depending on the features or specifications of the device.
installation. This equipment generates, uses and can radiate
Noise or sound skips may occur depending on the Bluetooth
radio frequency energy and, if not installed and used in
device connected with the system, the communication
accordance with the instructions, may cause harmful
environment or the usage environment.
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
VOLUME −/+
buttons
SOUND button/
indicator
(call) button
LOCK RELEASE
AUDIO IN button/
switch
indicator
BATTERY/CHARGE
indicator
N-mark
BLUETOOTH -PAIRING
button
Side stand
Bluetooth indicator
/ button
Illumination lamp
Microphone
RESET
AUDIO IN jack
button
DC IN12.5V
BLUETOOTH
DC OUT ONLY
jack
STANDBY switch
connector (USB)
Function of Parts
Turning the System on
and off/Charging the
BATTERY/CHARGE indicator
Lights up, flashes or turns off depending on the status of
system
the system.
For details, see the following section, "Indications of BATTERY/
CHARGE indicator. "
This system can operate by AC adaptor or built-in lithium-ion
battery (rechargeable). Charge the battery before using the
N-mark
system for the first time.
Touch to make Bluetooth connection with an NFC
compatible smartphone.
1
Connect the supplied AC adaptor.
(call) button
The BATTERY/CHARGE indicator (amber) lights up when
Press to call or operate during a call.
the battery is being charged, and turns off when charging
VOLUME −/+ buttons
is complete. It takes approximately 4 hours to charge the
Adjusts the volume.
battery.
LOCK RELEASE switch
Use for opening and closing the side stand.
Side stand
Open to use the system.
Illumination lamp
Lights up in a variety of colors depending on the status of
the system. For details, see the following section,
"Indications of Illumination lamp. "
Microphone
Use during a call.
DC IN 12.5V jack
Connects the supplied AC adaptor.
AUDIO IN jack
Connects to the headphone jack of a portable audio device,
computer, etc., using a connecting cord (not supplied).
BLUETOOTH STANDBY switch
Turns on and off the Bluetooth standby mode.
RESET button
Resets the system.
2
Press the / button.
DC OUT ONLY connector (USB)
Charges devices, such as your smartphone, etc. by
connecting to the DC OUT ONLY connector (USB connector).
SOUND button
Press to select a sound effect.
SOUND indicator
Lights up, according to the sound effect setting.
AUDIO IN button
Press to listen to sound from a device connected by a
connecting cord (not supplied).
AUDIO IN indicator (amber)
Lights up in AUDIO IN mode.
BLUETOOTH-PAIRING button
Press to pair with a Bluetooth device.
Bluetooth indicator (blue)
Lights up, flashes or turns off depending on the
communication status.
For details, see the following section, "Indications of the
Bluetooth function. "
/ button
Tip
Turns the system on/off.
You can operate the system by battery instead of the AC adaptor
by charging the system before use.
Indications of BATTERY/CHARGE
Notes
indicator (built-in lithium-ion battery)
When the BATTERY/CHARGE indicator flashes as below,
charge the system. In these cases, you cannot charge
Status
BATTERY/CHARGE indicator
devices via the DC OUT ONLY connector.
System turned on
Lights up (green) (battery
–
Flashes (green) (Battery power is low).
–
Flashes (amber), then turns off after turning on the system
operation only)
(No battery power remaining).
Battery requires charging
Flashes (green)
When you switch the power source between AC adaptor
Charging battery
Lights up (amber)
and battery by connecting/disconnecting the AC adaptor,
the system stops sound output for a short while. This is not
Charging complete
Off
a malfunction.
The maximum power output will be lower when the AC
Indications of Illumination lamp
adaptor is disconnected.
In an extremely cold or hot environment, note the following
Status
Illumination lamp
points.
–
When operating by the AC adaptor, charging may complete
AUDIO IN mode
Lights up (white)
too quickly, or may not be possible.
Searching for a device
Lights up (white)
–
When operating on battery only, the system may stop after
Lights up (blue)
the BATTERY/CHARGE indicator flashes (green) three times.
Connecting to Bluetooth
device
Charge the battery at least twice a year.
Pressing VOLUME−/+
Flashes once (white)
To reset the system
buttons
Press the RESET button on the rear of the system with a
When the volume hits the
Flashes three times (white)
pointed object if the buttons on the system do not function.
maximum or minimum
Tip
How to Make Wireless
To turn the illumination on/off, hold down the
BLUETOOTH-PAIRING button, then press and hold the /
Connection with
button.
Indications of the Bluetooth function
Bluetooth Devices
Status
Bluetooth indicator (blue)
You can enjoy music and hands-free calling with the system
Pairing with a device
Flashes quickly
wirelessly by using your device's Bluetooth function.
Choose one of the following three connection methods, best
Searching for a device
Flashes
suited for the Bluetooth device. For details on how to operate
Connected to a device
Lights up
your device, refer to the operating instructions supplied with
Bluetooth standby mode
Flashes slowly
the device.
Pairing with a Bluetooth device:
see
Pattern A
Opening the Side Stand
Bluetooth devices need to be "paired" with each other
beforehand.
Open the side stand and operate the buttons inside. The side
Connecting with a paired device:
stand also functions as a support while using the system.
see
Pattern B
Slide the LOCK RELEASE switch in the direction of the arrow
(illustration) to open the side stand.
To listen to music with a Bluetooth device that has been
paired, see this pattern.
One touch connection with a smartphone (NFC):
see
Pattern C
Using an NFC compatible smartphone, you can establish a
Bluetooth connection by just touching the system with it.
Check the following before operating the system.
Both the system and the device are placed within 1 m of
each other.
The system is connected to the AC adaptor, or the battery is
sufficiently charged.
The operating instructions supplied with the device are at
hand.
To close the side stand
Close the side stand when you carry the system.
Slide the LOCK RELEASE switch in the direction shown by the
arrow above, then close the side stand by hand.
The system automatically turns off when the side stand is
closed.
3
Pattern A
Touch the system with the smartphone.
Keep touching the smartphone on the N marked part of
Pairing and connecting with a
the system until the smartphone vibrates.
Bluetooth device
Smartphone vibrates
(system recognized)
1
Turn on the system.
The Bluetooth indicator (blue) flashes.
If the AUDIO IN indicator (amber) lights up, press the
BLUETOOTH-PAIRING button.
2
Set the Bluetooth function of the Bluetooth
device to on.
For details, refer to the operating instructions supplied
with the device.
3
Press and hold the BLUETOOTH-PAIRING
button on the system until two beeps are
heard.
The Bluetooth indicator (blue) begins to flash quickly and
pairing mode is entered.
Tip
When the system is turned on first time, the Bluetooth
Lights up
indicator (blue) starts flashing quickly.
Follow the on-screen instructions to establish the
connection.
When the Bluetooth connection is established, the
Bluetooth indicator (blue) stays on.
Tips
If it is difficult to establish the connection, try the following.
–
Activate the app "NFC Easy Connect" and move the
smartphone slightly on the N marked part of the system.
–
If the smartphone is in a case, remove it.
Touch the system with the smartphone again to disconnect.
If you have multiple NFC compatible devices, just touch the
smartphone to a different device to switch the connection
to that device. For example, when your smartphone is
Flashes quickly
connected with NFC compatible headphones, just touch the
smartphone to the system to change the Bluetooth
connection to the system (One touch connection switching).
4
Perform the pairing procedure on the
Listening to Music
Bluetooth device to detect the system.
5
You can enjoy music wirelessly, via the Bluetooth function built
Select "SRS-BTX300" shown in the display of
in your devices.
the Bluetooth device.
If "SRS- BTX300" does not appear on the device's display,
repeat from step 2.
Note
Some devices cannot display a list of detected devices.
6
If Passcode* input is required on the display
of the Bluetooth device, input "0000. "
The Bluetooth connection is established and the Bluetooth
indicator (blue) on the system stays on.
* Passcode may be called "Passkey, " "PIN code, " "PIN
number, " or "Password. "
Operations may vary depending on the Bluetooth device.
Tip
Refer also to the operating instructions supplied with your
To pair with other Bluetooth devices, repeat steps 2 to 6 for each
Bluetooth device.
device.
1
Make the Bluetooth connection between the
Notes
Pairing mode of the system is cancelled after about 5 minutes,
system and the device.
and the Bluetooth indicator (blue) flashes. If the pairing mode is
For details on the Bluetooth connection procedure, see
cancelled while performing this procedure, start over from
"How to Make Wireless Connection with Bluetooth
step 3.
Devices. " When the Bluetooth connection is established,
Passcode of the system is fixed as "0000. " The system cannot be
the Bluetooth indicator (blue) on the system stays on.
paired with a Bluetooth device whose Passcode is not "0000. "
Once Bluetooth devices are paired, there is no need to pair those
2
Start playback on the Bluetooth device, then
devices again. However, in the following case, you will need to
adjust the volume.
perform the pairing procedure again.
–
The system is paired with 9 or more devices.
Set the volume of the Bluetooth device to a moderate
The system can be paired with up to 8 Bluetooth devices. If a
level, and press the VOLUME –/+ buttons on the system.
new device is paired after 8 devices have been paired, the
Auto power off
device whose latest connection time is the oldest among the
8 paired devices is replaced by the new one.
The system automatically turns off after about 20 minutes
when the hands-free is not being used (the system is not
More than one device can be paired with the system, but sound
will be heard from just one of those devices.
connected with a Bluetooth device via HFP/HSP), and when no
device is being charged via the DC OUT ONLY connector, and
Pattern B
when no music is being played.
Connecting with a paired
After use
Do any of the following.
Bluetooth device
Set the Bluetooth function of the Bluetooth device off. For
details, refer to the operating instructions supplied with the
1
Turn on the system.
device.
Turn off the Bluetooth device.
The Bluetooth indicator (blue) flashes.
Turn off the system.
If the AUDIO IN indicator (amber) lights up, press the
Touch the system with the smartphone again to disconnect
BLUETOOTH-PAIRING button.
(NFC compatible smartphones only).
2
Set the Bluetooth function of the Bluetooth
device to on.
Using Hands-free Calling
Tip
In the case of the last-connected Bluetooth device, the
While Listening to Music
system tries to re-establish Bluetooth connection with it if
the device's Bluetooth function is on. When Bluetooth
connection is established, the Bluetooth indicator (blue) on
You can enjoy hands-free calling via Bluetooth connection
with a Bluetooth mobile phone that has a music function and
the system stays on.
supports the Bluetooth profile A2DP, and HFP or HSP.
3
Select "SRS-BTX300" shown in the display of
If your Bluetooth mobile phone supports both HFP and HSP,
the Bluetooth device.
set to HFP.
If necessary, select a Bluetooth profile that the system
supports from the following: A2DP, HSP or HFP. For details
on each profile, see "What is Bluetooth Wireless Technology?"
The Bluetooth connection is established and the Bluetooth
indicator (blue) on the system stays on.
Notes
This step may not be necessary for some devices.
If the system cannot connect to the Bluetooth device, delete
"SRS-BTX300" from the Bluetooth device, then perform
pairing again.
Bluetooth standby mode
When the Bluetooth standby mode is set to ON, the system can
be turned on and operated by a Bluetooth device.
Operations may vary depending on the Bluetooth mobile
phone. Refer also to the operating instructions supplied with
your mobile phone.
1
Make the Bluetooth connection between the
system and the mobile phone.
For details on the Bluetooth connection procedure, see
"How to Make Wireless Connection with Bluetooth
Devices. " When the Bluetooth connection is established,
the Bluetooth indicator (blue) on the system stays on.
2
Start playback on the Bluetooth mobile
phone, then adjust the volume.
Notes
The Bluetooth standby function will be turned off
Set the volume of the Bluetooth mobile phone to a
moderate level, and press the VOLUME –/+ buttons on the
automatically when the side stand is closed.
If the system is being powered by battery, even if the
system.
system is turned off, battery power will continue to be
To call
consumed if the BLUETOOTH STANDBY switch is set to ON.
Operate the Bluetooth mobile phone. Check that a dialing
Pattern C
tone is heard on the system and talk using the microphone. If
Connecting with a smartphone
no dialing tone is heard, press the
(call) button on the
system for about 2 seconds to change the call device to the
by One touch (NFC)
system.
To receive a call
By just touching the system with an NFC compatible
smartphone, the system is turned on automatically and then
When an incoming call arrives, the playback pauses and a ring
paired and connected with the smartphone.
tone is heard from the system. Press the
(call) button on
the system and talk using the microphone.
1
Download and install the app "NFC Easy
Connect" on the smartphone.
Tips
If no ring tone is heard from the system when incoming call
"NFC Easy Connect" is an original app by Sony for Android
arrives, stop playback and press the
(call) button to talk.
phones, and is available at Google Play Store.
You can use the hands-free calling when playback is completed
Search for "NFC Easy Connect" or scan the following two-
During a call, press the VOLUME –/+ buttons on the system to
dimensional code to download and install the free app.
adjust the volume.
Communication fees are required to download the app.
The app may not be downloadable in some country/
Notes
regions.
The sound is output from the left speaker only during a call.
Use your smartphone at least 50 cm from the system. Noise may
Tip
result if the system and smartphone are too close.
For some smartphones, One touch connection may be
To end a call
available without downloading the app "NFC Easy Connect. "
In that case, the operation and specifications may be
Press the
(call) button. If you were listening to music when
different from the description here. For details, refer to the
the call arrived, it will be resumed when the call has finished.
operating instructions supplied with the smartphone.
By the two-dimensional code:
After use
Use a two-dimensional code reader app.
Do any of the following.
Set the Bluetooth function of the Bluetooth device off. For
details, refer to the operating instructions supplied with the
device.
Turn off the Bluetooth device.
Turn off the system.
Touch the system with the smartphone again to disconnect
(NFC compatible smartphones only).
Unit button functions during a call
Compatible smartphones
Smartphones with the NFC function built-in
Available functions may vary depending on the Bluetooth
(OS: Android 2.3.3 or later, excluding Android 3.x)
mobile phone, or the profiles supported by the Bluetooth
mobile phone. Refer to the operating instructions supplied
About NFC
with the Bluetooth mobile phone.
NFC (Near Field Communication) is a technology enabling
Status
(call) button
short-range wireless communication between various
Standby
Press once to start voice dial (voice dial
devices, such as mobile phones and IC tags. Thanks to the
compatible mobile phones only).
NFC function, data communication can be achieved easily
Press for about 2 seconds to redial the phone
just by touching the relevant symbol or designated
number that is dialed last time.
location on NFC compatible devices.
Outgoing
2
Press once to cancel outgoing call.
Start the app "NFC Easy Connect" on the
call
Press for about 2 seconds to change call
smartphone.
device between the system and mobile
Make sure that the application screen is displayed.
phone.
Incoming
Press once to answer call.
call
Press for about 2 seconds to reject call.
During
Press once to finish call.
call
Press for about 2 seconds to change call
device between the system and mobile
phone.
Using Hands-free calling with another
Disposing of the System
Bluetooth mobile phone while
listening to music
For environment protection, remove the built-in lithium-ion
battery pack from the system.
This system is compatible with Multipoint technology, which
Before removing the battery, drain the battery by removing
allows you to enjoy hands-free calling while listening to music
the AC adaptor and using the system only with the battery.
from a Bluetooth-compatible music player.
Take out the lithium-ion battery for recycling.
Do not open the cabinet other than when disposing of
the system.
1
Turn off the system and remove the AC
adaptor.
2
Detach the cover of the rear of the system to
remove the battery pack.
Remove the two rubber covers at the center of the
rear of the system.
Remove the two screws.
Remove the cover.
Remove the connector plug from the system.
Remove the battery.
One touch connection (NFC) cannot be used in this
procedure.
Operations may vary depending on the Bluetooth device.
This type of Bluetooth connection may not be established
depending on the combination of the Bluetooth devices.
Refer also to the operating instructions supplied with your
Bluetooth devices.
1
Make the Bluetooth connections between the
system and a Bluetooth music player via
Note
A2DP, and between the system and a
Be careful not to damage the code cover with metallic tweezers,
Bluetooth mobile phone via HFP or HSP.
etc. when you remove the battery pack from the system.
For details on the Bluetooth connection procedure, see
"How to Make Wireless Connection with Bluetooth
Devices. " When the Bluetooth connection is established,
Specifications
the Bluetooth indicator (blue) on the system stays on.
Tips
AUDIO POWER SPECIFICATIONS
To use only the calling function of a Bluetooth mobile phone
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
that also has a music function, establish Bluetooth
With 6 ohm loads both channels driven,
connection between the system and the mobile phone via
from 150 Hz - 10,000 Hz; rated 10 watts per
HFP or HSP, not via A2DP.
channel minimum RMS power, with no
Depending on the Bluetooth mobile phone, while the
more than 10% total harmonic distortion
Bluetooth connection is established via HFP or HSP, the
in AC operation.
other Bluetooth connection via A2DP may also be occupied
by the same Bluetooth mobile phone. A Bluetooth music
Speaker section
player cannot be connected with this system in this case.
Speaker system
Main speaker :
Note
70 mm (2
4
/
in) × 2 (FULL RANGE)
5
To make the same connection with the same devices after
Passive speaker:
turning the system off, follow this procedure again.
103 mm × 60 mm (4
1
/
in × 2
2
/
in) (w/h)
10
5
Enclosure type
Passive radiator model
To Enjoy the Sound Effect
Amplifier section
Reference output power
Setting
10 W + 10 W (AC adaptor, at 1 % harmonic
distortion, 1 kHz, 6 Ω), 4 W + 4 W (Battery,
at 10 % harmonic distortion, 1 kHz, 6 Ω)
You can enjoy sound effects as desired.
Bluetooth
1
Press the SOUND button to select the sound
Communication System
effect.
Bluetooth Specification version 3.0
The SOUND indicator (see below) shows the current sound
Output
Bluetooth Specification Power Class 2
effect setting.
Maximum communication range
You can switch between effects by repeatedly pressing the
Line of sight approx. 10 m (30 ft)*
1
SOUND button.
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
Status
Sound effect
FHSS
Amber High-quality bass sound will be heard (MEGA
Compatible Bluetooth Profiles*
2
A2DP (Advanced Audio Distribution
BASS). This setting is enabled by default when
Profile)
you first turn on the system.
AVRCP (Audio Video Remote Control
Profile)
Green Surround sound will be heard (MEGA
HSP (Headset Profile)
HFP (Hands-free Profile)
BASS+SURROUND).
Supported Codec*
3
Off
The sound effect is off.
SBC*
4
, AAC*
5
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
Tip
44.1 kHz)
The system remembers the last sound effect setting next time it
*
1
The actual range will vary depending on factors such as
is turned on.
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
aerial's performance, operating system, software
Listening to Music by
application, etc.
*
2
Bluetooth standard profiles indicate the purpose of
Wired Connection with a
Bluetooth communication between devices.
*
Codec: Audio signal compression and conversion format
3
Portable Audio Device,
*
4
Subband Codec
*
5
Advanced Audio Coding
etc.
Microphone
Type:
Electret condenser
Directional characteristic:
1
Connect the device to the system.
Omni directional
Effective frequency range:
50 Hz -10 kHz
General
Input
AUDIO IN jack (ø 3.5 mm stereo mini jack)
DC OUT
USB jack Type A (for charging the battery
of a connected device) (5 V, Max.1.5 A)
Power
DC 12.5 V (using the supplied AC adaptor
connected to AC 100 V - 240 V, 50 Hz/60 Hz
power supply) or, using built-in lithium-ion
(Stereo mini jack)
battery
Usage life of lithium-ion battery (using the Bluetooth
connection)
approx. 8 hours*
6
Dimensions (including projecting parts and controls)
Approx. 341.0 mm × 115.0 mm × 58.5 mm
(13
1
/
in × 4
5
/
in × 2
3
/
in) (w/h/d)
2
8
8
(Side stand closed)
Approx. 341.0 mm × 115.0 mm ×72.0 mm
(13
1
/
in × 4
5
/
in × 2
7
/
in) (w/h/d)
2
8
8
Connecting cord (not supplied)
(Side stand open)
Mass
Approx.1,600 g (3 lb 8 oz)
2
Turn on the system.
including battery
Supplied accessories
3
Turn on the connected device.
AC adaptor (1)
Operating Instructions (this document) (2)
4
Press the AUDIO IN button on the system.
Bluetooth ® Startup Guide (1)
Warranty card (2)
5
Operate the connected device.
Carrying case (1)
Set the volume of the connected device to a moderate
*
6
Time may vary, depending on the temperature or
level, then press the VOLUME –/+ buttons on the system.
conditions of use.
Notes
Design and specifications are subject to change without
You cannot play music only by connecting to the system with
notice.
the connecting cord. Make sure to also press the AUDIO IN
button.
Hands-free calling is not available while you are listening to
music from a device connecting to the system by the connected
cord.
Auto power off
The system automatically turns off after about 20 minutes
when the hands-free is not being used (the system is not
connected with a Bluetooth device via HFP/HSP), and when
no device is being charged via the DC OUT ONLY connector,
and when no music is being played.
Charging USB Devices,
such as Smartphones, via
a USB Connection to the
System
You can charge your smartphone by connecting to the DC
OUT ONLY connector (USB) of the system. When using the
system by the built-in battery only, you can also charge a
smartphone from the battery of the system. Turn on the
system in order to charge a USB device.
USB cable
(not supplied)
Note
This function is not for data communication by USB cable.
Troubleshooting
No sound / Sound from only one speaker /
Low sound level
Check that both this system and
Check that the side stand is
the connected device are turned
opened.
on.
The system automatically turns off
when the side stand is closed.
Turn up the volume of the system
If you are connecting a personal
and the connected device.
computer to the system, make sure
the audio output setting of the
computer is set for a Bluetooth
device.
Check that the connected device is
Pair this system and the Bluetooth
being played back.
device again.
Check that both plugs of the
If the connected device is monaural,
connecting cord (not supplied) are
sound will only be output from the
firmly inserted into the system and
left speaker.
the connected device.
Distorted sound /
Humming or noise in the system output
Turn down the volume of the
Keep the system away from a TV.
connected device.
If the connected device has an
Switch the Bluetooth connection to
equalizer function, set it to off.
A2DP by operating the Bluetooth
device when HFP or HSP is set.
Keep the system away from a
If you connect a device with a built-
microwave oven, wireless LAN, etc.
in radio or tuner to this system,
broadcasts may not be received, or
sensitivity may be reduced. Locate
the system farther away from the
device and check that you can listen
to the broadcasts satisfactorily.
Bring this system and the
Charge the system by connecting
Bluetooth device closer together.
the AC adaptor if the BATTERY/
Remove any obstacle between this
CHARGE indicator flashes in green
.
system and the Bluetooth device.
Pairing is not possible
Bring this system and the Bluetooth
If the Bluetooth indicator (blue) is not
device to within 1 m of each other.
flashing quickly, press and hold the
BLUETOOTH-PAIRING button on the
system until two beeps are heard.
No voice / Low voice from recipient
Check that both this system and
Select HFP or HSP Bluetooth
the connected device are turned
connection by operating the
on.
Bluetooth device.
Check that output of the Bluetooth
Turn up the volume of the system
mobile phone is set for the system.
and the connected device.
One touch connection (NFC) is
not possible
Keep the smartphone close to the
If the smartphone is in a case,
system until the smartphone
remove it.
vibrates. If you fail, move the
smartphone slightly on the N
marked part of the system.
Check that the NFC function of the
NFC receiving sensitivity depends on
smartphone is set to on.
the device. If you fail to connect with
a smartphone by One touch several
times, connect to the system by on-
screen operation.
Check that the "NFC Easy Connect"
app is displayed on the
smartphone.