Sony SRS-BTX500 운영 지침
{카테고리_이름} Sony SRS-BTX500에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SRS-BTX500 2 페이지. Premium bluetooth speaker
Sony SRS-BTX500에 대해서도 마찬가지입니다: 운영 지침 (2 페이지), 지침 및 운영 매뉴얼 (2 페이지), 시작 매뉴얼 (2 페이지), 운영 지침 (2 페이지), 사양 (2 페이지), 사양 (2 페이지), 운영 지침 (2 페이지)
페이지 인쇄
4-457-524-11(1)
Personal Audio System
Operating Instructions
Manual de instrucciones
©2013 Sony Corporation Printed in China
SRS-BTX500
— Reorient or relocate the receiving antenna.
English
Personal Audio System
— Increase the separation between the equipment and
receiver.
Before operating the system, please read this guide
thoroughly and retain it for future reference.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Owner's Record
— Consult the dealer or an experienced radio/TV technician
The serial number is located on the bottom.
for help.
Record the serial number in the space provided below. Refer
For the customers in the USA and Canada
to them whenever you call upon your Sony dealer regarding
this product.
RECYCLING LITHIUM-ION BATTERIES
Model No. SRS-BTX500
Lithium-Ion batteries are recyclable.
Serial No. ________________________________
You can help preserve our environment
by returning your used rechargeable
batteries to the collection and recycling
For customers in the USA
location nearest you.
Please register this product on line at
http://www.sony.com/productregistration
For more information regarding
Proper registration will enable us to send
you periodic updates about new products,
recycling of rechargeable batteries, call toll free
services and other important announcements.
1-800-822-8837, or visit http://www.rbrc.org/
Registering your product will also allow us
to contact you in the unlikely event that the
Caution:
Do not handle damaged or leaking Lithium-Ion
product needs adjustment or modification.
batteries.
Thank you.
Precautions
WARNING
Notes when using with a mobile phone
To reduce the risk of fire or electric shock, do not
For details on operation of your mobile phone when
expose this apparatus to rain or moisture.
receiving a telephone call while transmitting the sound
using the Bluetooth connection, refer to the operating
To reduce the risk of fire, do not cover the ventilation of the
instructions supplied with the mobile phone.
apparatus with newspapers, tablecloths, curtains, etc. And do
not place lighted candles on the apparatus.
On safety
To reduce the risk of fire or electric shock, do not expose this
Notes on the AC adaptor
apparatus to dripping or splashing, and do not place objects
When connecting or disconnecting the AC adaptor, turn off
filled with liquids, such as vases, on the apparatus.
the system beforehand. Otherwise, it may cause
malfunction.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
Use only the supplied AC adaptor. To avoid damaging the
system, do not use any other AC adaptor.
Do not expose the batteries (battery pack or batteries
installed) to excessive heat such as sunshine, fire or the like for
a long time.
As the main plug of AC adaptor is used to disconnect the AC
Polarity of the plug
adaptor from the mains, connect it to an easily accessible AC
outlet. Should you notice an abnormality in it, disconnect it
Plug the AC adaptor into a nearby wall outlet (mains). In the
case of a problem, unplug it from the wall outlet (mains)
from the AC outlet immediately.
immediately.
The unit is not disconnected from the AC power source
Do not install the AC adaptor in a confined space, such as a
(mains) as long as it is connected to the wall outlet, even if the
bookcase or built-in cabinet.
unit itself has been turned off.
To reduce the risk of fire or electric shock, do not expose the
AC adaptor to dripping or splashing, and do not place
The nameplate and important information concerning safety
objects filled with liquids, such as vases, on the AC adaptor.
are located on the bottom exterior of the main unit and on the
surface of the AC adaptor.
On placement
Do not set the speaker in an inclined position.
You are cautioned that any changes or modifications not
Do not leave the system in a location near heat sources, or
expressly approved in this manual could void your authority
in a place subject to direct sunlight, excessive dust,
to operate this equipment.
moisture, rain or mechanical shock.
This equipment must not be co-located or operated in
On operation
conjunction with any other antenna or transmitter.
Do not insert any small objects, etc., into the jacks or
This equipment complies with FCC/IC radiation exposure
ventilation hole on the rear of the system. The system may
limits set forth for an uncontrolled environment and meets
short out or malfunction.
the FCC radio frequency (RF) Exposure Guidelines in
On cleaning
Supplement C to OET65 and RSS-102 of the IC radio frequency
Do not use alcohol, benzine, or thinner to clean the cabinet.
(RF) Exposure rules.
This equipment has very low levels of RF energy that it
Others
deemed to comply without maximum permissive exposure
If you have any questions or problems concerning this
evaluation (MPE). But it is desirable that it should be installed
system that are not covered in this manual, please consult
and operated keeping the radiator at least 20 cm or more
your nearest Sony dealer.
away from person's body (excluding extremities: hands, wrists,
feet and ankles).
Under Industry Canada regulations, this radio transmitter may
What is Bluetooth
only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada.
Wireless Technology?
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
Bluetooth wireless technology is a short-range wireless
equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
technology that enables wireless data communication
between digital devices, such as a computer and digital
This device complies with Industry Canada license-exempt
camera. Bluetooth wireless technology operates within a range
RSS standard(s). Operation is subject to the following two
of about 10 m.
conditions: (1) this device may not cause interference, and (2)
Connecting two devices as necessary is common, but some
this device must accept any interference, including
devices can be connected to multiple devices at the same
interference that may cause undesired operation of the
time.
device.
You do not need to use a cable for connection, nor is it
necessary for the devices to face one another, such is the case
This Class B digital apparatus complies with Canadian
with infrared technology. For example, you can use such a
ICES-003.
device in a bag or pocket.
Important Safety Instructions
Bluetooth standard is an international standard supported by
thousands of companies all over the world, and employed by
1) Read these instructions.
various companies worldwide.
2) Keep these instructions.
Communication system and
3) Heed all warnings.
compatible Bluetooth profiles of the
4) Follow all instructions.
system
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
Profile is standardisation of the function for each Bluetooth
7) Do not block any ventilation openings.
device specification. The system supports the following
Install in accordance with the manufacturer's instructions.
Bluetooth version and profiles:
8) Do not install near any heat sources such as radiators, heat
Communication System:
Bluetooth Specification version 3.0
registers, stoves, or other apparatus (including amplifiers)
Compatible Bluetooth Profiles:
that produce heat.
–
A2DP (Advanced Audio Distribution Profile): Transmitting
9) Do not defeat the safety purpose of the polarized or
or receiving audio content of high-quality.
grounding-type plug. A polarized plug has two blades
–
AVRCP (Audio Video Remote Control Profile): Controlling
with one wider than the other. A grounding type plug has
the volume.
two blades and a third grounding prong. The wide blade
–
HSP (Headset Profile): Talking on the phone/Operating the
phone.
or the third prong are provided for your safety. If the
–
HFP (Hands-free Profile): Talking on the phone/Operating
provided plug does not fit into your outlet, consult an
the phone by hands-free.
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
Maximum communication range
particularly at plugs, convenience receptacles, and the
Use Bluetooth devices within 10 m (line of sight) of the system.
point where they exit from the apparatus.
Maximum communication range may shorten under the
11) Only use attachments/accessories specified by the
following conditions.
manufacturer.
–
There is an obstacle such as a person, metal, or wall
between the system and Bluetooth device.
12) Use only with the cart, stand, tripod, bracket, or table
–
A wireless LAN device is in use near the system.
specified by the manufacturer, or sold with the apparatus.
–
A microwave oven is in use near the system.
When a cart is used, use caution when moving the
–
A device that generates electromagnetic radiation is in
cart/apparatus combination to avoid injury from tip-over.
use near the system.
Interference from other devices
Because Bluetooth devices and wireless LAN (IEEE802.11b/g)
use the same frequency, microwave interference may occur
and resulting in communication speed deterioration, noise, or
13) Unplug this apparatus during lightning storms or when
invalid connection if the system is used near a wireless LAN
device. In such a case, perform the following.
unused for long periods of time.
–
Use the system at least 10 m away from the wireless LAN
14) Refer all servicing to qualified service personnel. Servicing
device.
is required when the apparatus has been damaged in any
–
If the system is used within 10 m of a wireless LAN device,
way, such as power-supply cord or plug is damaged, liquid
turn off the wireless LAN device.
has been spilled or objects have fallen into the apparatus,
Interference to other devices
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Microwaves emitting from a Bluetooth device may affect the
operation of electronic medical devices. Turn off the system
WARNING
and other Bluetooth devices in the following locations, as it
may cause an accident.
Battery may explode if mistreated. Do not recharge,
–
where inflammable gas is present, in a hospital, train,
disassemble or dispose of in fire.
airplane, or a gas station
Dispose of used battery promptly, according to local
–
near automatic doors or a fire alarm
environmental laws and guidelines in force. Keep away from
children.
Notes
For the State of California, USA only
To be able to use the Bluetooth function, the Bluetooth
device to be connected requires the same profile as the
Perchlorate Material - special handling may apply, See
system's.
www.dtsc.ca.gov/hazardouswaste/perchlorate
Note also that even if the same profile exists, devices may
Perchlorate Material : Lithium battery contains perchlorate.
vary in function depending on their specifications.
On Copyrights and Licenses
Due to the characteristic of Bluetooth wireless technology,
the sound played on the system is slightly delayed from the
The Bluetooth® word mark and logos are owned by the
sound played on the Bluetooth device during talking on the
Bluetooth SIG, Inc. and any use of such marks by Sony
Corporation is under license.
telephone or listening to the music.
This system supports security capabilities that comply with
The N Mark is a trademark or registered trademark of NFC
Forum, Inc. in the United States and in other countries.
the Bluetooth standard to provide a secure connection
when the Bluetooth wireless technology is used, but
Android is a trademark of Google Inc.
security may not be enough depending on the setting. Be
iPhone is a trademark of Apple Inc., registered in the U.S. and
other countries.
careful when communicating using Bluetooth wireless
technology.
Other trademarks and trade names are those of their
We do not take any responsibility for the leakage of
respective owners.
information during Bluetooth communication.
NOTE
A device featuring the Bluetooth function is required to
conform to the Bluetooth standard specified by Bluetooth
This equipment has been tested and found to comply with the
SIG, and be authenticated. Even if the connected device
limits for a Class B digital device, pursuant to Part 15 of the
conforms to the above mentioned Bluetooth standard,
FCC Rules. These limits are designed to provide reasonable
some devices may not be connected or work correctly,
protection against harmful interference in a residential
depending on the features or specifications of the device.
installation. This equipment generates, uses and can radiate
Noise or sound skips may occur depending on the Bluetooth
radio frequency energy and, if not installed and used in
device connected with the system, the communication
accordance with the instructions, may cause harmful
environment or the usage environment.
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
VOLUME −/+
buttons
SOUND button/
indicator
(call) button
AUDIO IN button/
indicator
BATTERY/CHARGE
indicator
N-mark
BLUETOOTH -PAIRING
button
Bluetooth indicator
/ button
Illumination lamp
Microphone
Stand
DC IN 15V jack AUDIO IN jack
BLUETOOTH
RESET
DC OUT ONLY
STANDBY switch
button
connector (USB)
Function of Parts
Turning the System on
and off/Charging the
BATTERY/CHARGE indicator
Lights up, flashes or turns off depending on the status of
system
the system.
For details, see the following section, "Indications of BATTERY/
CHARGE indicator. "
This system can operate by AC adaptor or built-in lithium-ion
battery (rechargeable). Charge the battery before using the
N-mark
system for the first time.
Touch to make Bluetooth connection with an NFC
compatible smartphone.
1
Connect the supplied AC adaptor.
(call) button
The BATTERY/CHARGE indicator (amber) lights up when
Press to call or operate during a call.
the battery is being charged, and turns off when charging
VOLUME −/+ buttons
is complete. It takes approximately 4 hours to charge the
Adjusts the volume.
battery.
Illumination lamp
Lights up in a variety of colors depending on the status of
the system. For details, see the following section,
"Indications of Illumination lamp. "
Microphone
Use during a call.
Stand
Open to use the system.
DC IN 15V jack
Connects the supplied AC adaptor.
AUDIO IN jack
Connects to the headphone jack of a portable audio device,
computer, etc., using a connecting cord (not supplied).
BLUETOOTH STANDBY switch
Turns on and off the Bluetooth standby mode.
RESET button
Resets the system.
DC OUT ONLY connector (USB)
Charges devices, such as your smartphone, etc. by
2
Press the / button.
connecting to the DC OUT ONLY connector (USB connector).
SOUND button
Press to select a sound effect.
SOUND indicator
Lights up, according to the sound effect setting.
AUDIO IN button
Press to listen to sound from a device connected by a
connecting cord (not supplied).
AUDIO IN indicator (amber)
Lights up in AUDIO IN mode.
BLUETOOTH-PAIRING button
Press to pair with a Bluetooth device.
Bluetooth indicator (blue)
Lights up, flashes or turns off depending on the
communication status.
For details, see the following section, "Indications of the
Bluetooth function. "
/ button
Turns the system on/off.
Tip
Indications of BATTERY/CHARGE
You can operate the system by battery instead of the AC adaptor
indicator (built-in lithium-ion battery)
by charging the system before use.
Notes
Status
BATTERY/CHARGE indicator
When the BATTERY/CHARGE indicator flashes as below,
System turned on
Lights up (green) (battery
charge the system. In these cases, you cannot charge
operation only)
devices via the DC OUT ONLY connector.
Flashes (green)
–
Flashes (green) (Battery power is low).
Battery requires charging
–
Flashes (amber), then turns off after turning on the system
Lights up (amber)
Charging battery
(No battery power remaining).
Charging complete
Off
When you switch the power source between AC adaptor
and battery by connecting/disconnecting the AC adaptor,
the system stops sound output for a short while. This is not
Indications of Illumination lamp
a malfunction.
The maximum power output will be lower when the AC
Status
Illumination lamp
adaptor is disconnected.
AUDIO IN mode
Lights up (white)
In an extremely cold or hot environment, note the following
points.
Searching for a device
Lights up (white)
–
When operating by the AC adaptor, charging may complete
Connecting to Bluetooth
Lights up (blue)
too quickly, or may not be possible.
device
–
When operating on battery only, the system may stop after
the BATTERY/CHARGE indicator flashes (green) three times.
Pressing VOLUME−/+
Flashes once (white)
Charge the battery at least twice a year.
buttons
To reset the system
When the volume hits the
Flashes three times (white)
maximum or minimum
Press the RESET button on the rear of the system with a
pointed object if the buttons on the system do not function.
Tip
To turn the illumination on/off, hold down the
BLUETOOTH-PAIRING button, then press and hold the /
How to Make Wireless
button.
Indications of the Bluetooth function
Connection with
Status
Bluetooth indicator (blue)
Bluetooth Devices
Pairing with a device
Flashes quickly
Searching for a device
Flashes
You can enjoy music and hands-free calling with the system
wirelessly by using your device's Bluetooth function.
Connected to a device
Lights up
Choose one of the following three connection methods, best
Flashes slowly
Bluetooth standby mode
suited for the Bluetooth device. For details on how to operate
your device, refer to the operating instructions supplied with
the device.
Opening the Stand
Pairing with a Bluetooth device:
see
Pattern A
The system stands itself by opening the stand.
Bluetooth devices need to be "paired" with each other
beforehand.
Connecting with a paired device:
see
Pattern B
To listen to music with a Bluetooth device that has been
paired, see this pattern.
One touch connection with a smartphone (NFC):
see
Pattern C
To close the stand
Using an NFC compatible smartphone, you can establish a
Close the stand to the opposite way of arrow.
Bluetooth connection by just touching the system with it.
Check the following before operating the system.
Both the system and the device are placed within 1 m of
each other.
The system is connected to the AC adaptor, or the battery is
sufficiently charged.
The operating instructions supplied with the device are at
hand.
Pattern A
Pairing and connecting with a
Bluetooth device
1
Turn on the system.
The Bluetooth indicator (blue) flashes.
If the AUDIO IN indicator (amber) lights up, press the
BLUETOOTH-PAIRING button.
2
Set the Bluetooth function of the Bluetooth
device to on.
For details, refer to the operating instructions supplied
with the device.
3
Press and hold the BLUETOOTH-PAIRING
button on the system until two beeps are
heard.
The Bluetooth indicator (blue) begins to flash quickly and
pairing mode is entered.
Tip
Tips
When the system is turned on first time, the Bluetooth
If it is difficult to establish the connection, try the following.
–
Activate the app "NFC Easy Connect" and move the
indicator (blue) starts flashing quickly.
smartphone slightly on the N marked part of the system.
–
If the smartphone is in a case, remove it.
Touch the system with the smartphone again to disconnect.
If you have multiple NFC compatible devices, just touch the
smartphone to a different device to switch the connection
to that device. For example, when your smartphone is
connected with NFC compatible headphones, just touch the
smartphone to the system to change the Bluetooth
connection to the system (One touch connection switching).
Listening to Music
You can enjoy music wirelessly, via the Bluetooth function built
Flashes
in your devices.
quickly
4
Perform the pairing procedure on the
Bluetooth device to detect the system.
5
Select "SRS-BTX500" shown in the display of
the Bluetooth device.
If "SRS- BTX500" does not appear on the device's display,
repeat from step 2.
Note
Operations may vary depending on the Bluetooth device.
Some devices cannot display a list of detected devices.
Refer also to the operating instructions supplied with your
Bluetooth device.
6
If Passcode* input is required on the display
1
Make the Bluetooth connection between the
of the Bluetooth device, input "0000. "
system and the device.
The Bluetooth connection is established and the Bluetooth
indicator (blue) on the system stays on.
For details on the Bluetooth connection procedure, see
* Passcode may be called "Passkey, " "PIN code, " "PIN
"How to Make Wireless Connection with Bluetooth
number, " or "Password. "
Devices. " When the Bluetooth connection is established,
the Bluetooth indicator (blue) on the system stays on.
Tip
2
Start playback on the Bluetooth device, then
To pair with other Bluetooth devices, repeat steps 2 to 6 for each
device.
adjust the volume.
Set the volume of the Bluetooth device to a moderate
Notes
level, and press the VOLUME –/+ buttons on the system.
Pairing mode of the system is cancelled after about 5 minutes,
and the Bluetooth indicator (blue) flashes. If the pairing mode is
Auto power off
cancelled while performing this procedure, start over from
The system automatically turns off after about 20 minutes
step 3.
when the hands-free is not being used (the system is not
Passcode of the system is fixed as "0000. " The system cannot be
connected with a Bluetooth device via HFP/HSP), and when no
paired with a Bluetooth device whose Passcode is not "0000. "
device is being charged via the DC OUT ONLY connector, and
Once Bluetooth devices are paired, there is no need to pair those
when no music is being played.
devices again. However, in the following case, you will need to
perform the pairing procedure again.
After use
–
The system is paired with 9 or more devices.
Do any of the following.
The system can be paired with up to 8 Bluetooth devices. If a
Set the Bluetooth function of the Bluetooth device off. For
new device is paired after 8 devices have been paired, the
details, refer to the operating instructions supplied with the
device whose latest connection time is the oldest among the
device.
8 paired devices is replaced by the new one.
More than one device can be paired with the system, but sound
Turn off the Bluetooth device.
will be heard from just one of those devices.
Turn off the system.
Touch the system with the smartphone again to disconnect
Pattern B
(NFC compatible smartphones only).
Connecting with a paired
Bluetooth device
Using Hands-free Calling
While Listening to Music
1
Turn on the system.
The Bluetooth indicator (blue) flashes.
If the AUDIO IN indicator (amber) lights up, press the
You can enjoy hands-free calling via Bluetooth connection
with a Bluetooth mobile phone that has a music function and
BLUETOOTH-PAIRING button.
supports the Bluetooth profile A2DP, and HFP or HSP.
2
Set the Bluetooth function of the Bluetooth
If your Bluetooth mobile phone supports both HFP and HSP,
device to on.
set to HFP.
Tip
In the case of the last-connected Bluetooth device, the
system tries to re-establish Bluetooth connection with it if
the device's Bluetooth function is on. When Bluetooth
connection is established, the Bluetooth indicator (blue) on
the system stays on.
3
Select "SRS-BTX500" shown in the display of
the Bluetooth device.
If necessary, select a Bluetooth profile that the system
supports from the following: A2DP, HSP or HFP. For details
on each profile, see "What is Bluetooth Wireless Technology?"
The Bluetooth connection is established and the Bluetooth
indicator (blue) on the system stays on.
Notes
This step may not be necessary for some devices.
If the system cannot connect to the Bluetooth device, delete
"SRS-BTX500" from the Bluetooth device, then perform
pairing again.
Bluetooth standby mode
Operations may vary depending on the Bluetooth mobile
When the Bluetooth standby mode is set to ON, the system can
phone. Refer also to the operating instructions supplied with
be turned on and operated by a Bluetooth device.
your mobile phone.
1
Make the Bluetooth connection between the
system and the mobile phone.
For details on the Bluetooth connection procedure, see
"How to Make Wireless Connection with Bluetooth
Devices. " When the Bluetooth connection is established,
the Bluetooth indicator (blue) on the system stays on.
2
Start playback on the Bluetooth mobile
phone, then adjust the volume.
Set the volume of the Bluetooth mobile phone to a
moderate level, and press the VOLUME –/+ buttons on the
system.
To call
Operate the Bluetooth mobile phone. Check that a dialing
tone is heard on the system and talk using the microphone. If
no dialing tone is heard, press the
(call) button on the
system for about 2 seconds to change the call device to the
system.
To receive a call
Note
When an incoming call arrives, the playback pauses and a ring
If the system is being powered by battery, even if the
tone is heard from the system. Press the
(call) button on
system is turned off, battery power will continue to be
the system and talk using the microphone.
consumed if the BLUETOOTH STANDBY switch is set to ON.
Tips
Pattern C
If no ring tone is heard from the system when incoming call
Connecting with a smartphone
arrives, stop playback and press the
(call) button to talk.
You can use the hands-free calling when playback is completed.
by One touch (NFC)
During a call, press the VOLUME –/+ buttons on the system to
adjust the volume.
By just touching the system with an NFC compatible
Notes
smartphone, the system is turned on automatically and then
The sound is output from the left speaker only during a call.
paired and connected with the smartphone.
Use your smartphone at least 50 cm from the system. Noise may
1
Download and install the app "NFC Easy
result if the system and smartphone are too close.
Connect" on the smartphone.
To end a call
"NFC Easy Connect" is an original app by Sony for Android
Press the
(call) button. If you were listening to music when
phones, and is available at Google Play Store.
the call arrived, it will be resumed when the call has finished.
Search for "NFC Easy Connect" or scan the following two-
dimensional code to download and install the free app.
After use
Communication fees are required to download the app.
Do any of the following.
The app may not be downloadable in some country/
Set the Bluetooth function of the Bluetooth device off. For
regions.
details, refer to the operating instructions supplied with the
device.
Tip
Turn off the Bluetooth device.
For some smartphones, One touch connection may be
Turn off the system.
available without downloading the app "NFC Easy Connect. "
Touch the system with the smartphone again to disconnect
In that case, the operation and specifications may be
(NFC compatible smartphones only).
different from the description here. For details, refer to the
operating instructions supplied with the smartphone.
Unit button functions during a call
By the two-dimensional code:
Available functions may vary depending on the Bluetooth
Use a two-dimensional code reader app.
mobile phone, or the profiles supported by the Bluetooth
mobile phone. Refer to the operating instructions supplied
with the Bluetooth mobile phone.
Status
(call) button
Standby
Press once to start voice dial (voice dial
compatible mobile phones only).
Press for about 2 seconds to redial the phone
number that is dialed last time.
Compatible smartphones
Outgoing
Press once to cancel outgoing call.
Smartphones with the NFC function built-in
call
Press for about 2 seconds to change call
(OS: Android 2.3.3 or later, excluding Android 3.x)
device between the system and mobile
phone.
About NFC
Incoming
NFC (Near Field Communication) is a technology enabling
Press once to answer call.
call
Press for about 2 seconds to reject call.
short-range wireless communication between various
devices, such as mobile phones and IC tags. Thanks to the
During
Press once to finish call.
NFC function, data communication can be achieved easily
call
Press for about 2 seconds to change call
just by touching the relevant symbol or designated
device between the system and mobile
location on NFC compatible devices.
phone.
2
Start the app "NFC Easy Connect" on the
smartphone.
Using Hands-free calling with another
Make sure that the application screen is displayed.
Bluetooth mobile phone while
3
Touch the system with the smartphone.
listening to music
Keep touching the smartphone on the N marked part of
This system is compatible with Multipoint technology, which
the system until the smartphone vibrates.
allows you to enjoy hands-free calling while listening to music
Smartphone vibrates
from a Bluetooth-compatible music player.
(system recognized)
Lights up
One touch connection (NFC) cannot be used in this
Follow the on-screen instructions to establish the
procedure.
connection.
Operations may vary depending on the Bluetooth device.
When the Bluetooth connection is established, the
This type of Bluetooth connection may not be established
Bluetooth indicator (blue) stays on.
depending on the combination of the Bluetooth devices.
Refer also to the operating instructions supplied with your
Bluetooth devices.
1
Make the Bluetooth connections between the
Specifications
system and a Bluetooth music player via
A2DP, and between the system and a
Bluetooth mobile phone via HFP or HSP.
Speaker section
For details on the Bluetooth connection procedure, see
Speaker system
Satellite speaker:
"How to Make Wireless Connection with Bluetooth
Approx. 48mm (1
15
/
in) dia. × 2
16
Devices. " When the Bluetooth connection is established,
Subwoofer:
the Bluetooth indicator (blue) on the system stays on.
Approx. 80mm (3
1
/
in) dia. × 1
4
Enclosure type
Satellite speaker: Sealed enclosure
Tips
Subwoofer: Passive radiator model
To use only the calling function of a Bluetooth mobile phone
that also has a music function, establish Bluetooth
Amplifier section
connection between the system and the mobile phone via
HFP or HSP, not via A2DP.
Reference output power
Depending on the Bluetooth mobile phone, while the
Using AC adaptor: 10 W + 10 W (Satellite
Bluetooth connection is established via HFP or HSP, the
speaker, at 1 % harmonic distortion, 1 kHz,
other Bluetooth connection via A2DP may also be occupied
6 Ω) 20 W (Subwoofer, at 1 % harmonic
by the same Bluetooth mobile phone. A Bluetooth music
distortion, 100 Hz, 4 Ω)
player cannot be connected with this system in this case.
Using battery: 4 W + 4 W (Satellite speaker,
at 10 % harmonic distortion, 1 kHz, 6 Ω)
Note
8 W (Subwoofer, at 10 % harmonic
To make the same connection with the same devices after
distortion, 100 Hz, 4 Ω)
turning the system off, follow this procedure again.
Bluetooth
Communication System
To Enjoy the Sound Effect
Bluetooth Specification version 3.0
Output
Bluetooth Specification Power Class 2
Setting
Maximum communication range
Line of sight approx. 10 m (30 ft)*
1
You can enjoy sound effects as desired.
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
1
Press the SOUND button to select the sound
Modulation method
FHSS
effect.
Compatible Bluetooth Profiles*
2
The SOUND indicator (see below) shows the current sound
A2DP (Advanced Audio Distribution
effect setting.
Profile)
You can switch between effects by repeatedly pressing the
AVRCP (Audio Video Remote Control
SOUND button.
Profile)
HSP (Headset Profile)
HFP (Hands-free Profile)
Status
Sound effect
Supported Codec*
3
Amber High-quality bass sound will be heard (MEGA
SBC*
4
, AAC*
5
BASS). This setting is enabled by default when
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
you first turn on the system.
44.1 kHz)
Green Surround sound will be heard (MEGA
*
1
The actual range will vary depending on factors such as
BASS+SURROUND).
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
Off
The sound effect is off.
aerial's performance, operating system, software
application, etc.
*
2
Bluetooth standard profiles indicate the purpose of
Tip
Bluetooth communication between devices.
*
Codec: Audio signal compression and conversion format
The system remembers the last sound effect setting next time it
3
*
4
Subband Codec
is turned on.
*
5
Advanced Audio Coding
Microphone
Listening to Music by
Type:
Electret condenser
Directional characteristic:
Wired Connection with a
Omni directional
Effective frequency range:
Portable Audio Device,
50 Hz -10 kHz
General
etc.
Input
AUDIO IN jack (ø 3.5 mm stereo mini jack)
DC OUT
USB jack Type A (for charging the battery
1
Connect the device to the system.
of a connected device) (5 V, Max.1.5 A)
Power
DC 15 V (using the supplied AC adaptor
connected to AC 100 V - 240 V, 50 Hz/60 Hz
power supply) or, using built-in lithium-ion
battery
Usage life of lithium-ion battery (using the Bluetooth
connection)
approx. 6 hours*
6
Dimensions (including projecting parts and controls)
Approx. 385.0 mm × 152.0 mm × 65.0 mm
(15
1
/
in × 6 in × 2
5
/
in) (w/h/d)
4
8
Mass
Approx. 2,000 g (4 lb 7 oz)
including battery
(Stereo mini jack)
Supplied accessories
AC adaptor (AC-E1530) (1)
Operating Instructions (this document) (2)
Bluetooth ® Startup Guide (1)
Warranty card (2)
Carrying case (1)
*
Time may vary, depending on the temperature or
6
conditions of use.
Design and specifications are subject to change without
notice.
Connecting cord (not supplied)
2
Turn on the system.
3
Turn on the connected device.
4
Press the AUDIO IN button on the system.
5
Operate the connected device.
Set the volume of the connected device to a moderate
level, then press the VOLUME –/+ buttons on the system.
Notes
You cannot play music only by connecting to the system with
the connecting cord. Make sure to also press the AUDIO IN
button.
Hands-free calling is not available while you are listening to
music from a device connecting to the system by the connected
cord.
Auto power off
The system automatically turns off after about 20 minutes
when the hands-free is not being used (the system is not
connected with a Bluetooth device via HFP/HSP), and when
no device is being charged via the DC OUT ONLY connector,
and when no music is being played.
Charging USB Devices,
such as Smartphones, via
a USB Connection to the
System
You can charge your smartphone by connecting to the DC
OUT ONLY connector (USB) of the system. When using the
system by the built-in battery only, you can also charge a
smartphone from the battery of the system. Turn on the
system in order to charge a USB device.
USB cable
(not supplied)
Note
This function is not for data communication by USB cable.
Disposing of the System
For environment protection, remove the built-in lithium-ion
battery pack from the system.
Before removing the battery, drain the battery by removing
the AC adaptor and using the system only with the battery.
Take out the lithium-ion battery for recycling.
Do not open the cabinet other than when disposing of
the system.
1
Turn off the system and remove the AC
adaptor.
2
Detach the cover of the rear of the system to
remove the battery pack.
Open the stand.
Remove the 4 rubber covers from the bottom of the
system.
Remove the 4 screws.
Remove the cover.
Remove the connector plug from the system.
Remove the battery.
Note
Be careful not to damage the code cover with metallic tweezers,
etc. when you remove the battery pack from the system.
Troubleshooting
No sound / Sound from only one speaker /
Low sound level
Check that both this system and
If you are connecting a personal
the connected device are turned
computer to the system, make sure
on.
the audio output setting of the
computer is set for a Bluetooth
device.
Turn up the volume of the system
Pair this system and the Bluetooth
and the connected device.
device again.
Check that the connected device is
If the connected device is monaural,
being played back.
sound will only be output from the
left speaker.
Check that both plugs of the
connecting cord (not supplied) are
firmly inserted into the system and
the connected device.
Distorted sound /
Humming or noise in the system output
Turn down the volume of the
Keep the system away from a TV.
connected device.
If the connected device has an
Switch the Bluetooth connection to
equalizer function, set it to off.
A2DP by operating the Bluetooth
device when HFP or HSP is set.
Keep the system away from a
If you connect a device with a built-
microwave oven, wireless LAN, etc.
in radio or tuner to this system,
broadcasts may not be received, or
sensitivity may be reduced. Locate
the system farther away from the
device and check that you can listen
to the broadcasts satisfactorily.
Bring this system and the
Charge the system by connecting
Bluetooth device closer together.
the AC adaptor if the BATTERY/
Remove any obstacle between this
CHARGE indicator flashes in green
.
system and the Bluetooth device.
Pairing is not possible
Bring this system and the Bluetooth
If the Bluetooth indicator (blue) is not
device to within 1 m of each other.
flashing quickly, press and hold the
BLUETOOTH-PAIRING button on the
system until two beeps are heard.
No voice / Low voice from recipient
Check that both this system and
Select HFP or HSP Bluetooth
the connected device are turned
connection by operating the
on.
Bluetooth device.
Check that output of the Bluetooth
Turn up the volume of the system
mobile phone is set for the system.
and the connected device.
One touch connection (NFC) is
not possible
Keep the smartphone close to the
If the smartphone is in a case,
system until the smartphone
remove it.
vibrates. If you fail, move the
smartphone slightly on the N
marked part of the system.
Check that the NFC function of the
NFC receiving sensitivity depends on
smartphone is set to on.
the device. If you fail to connect with
a smartphone by One touch several
times, connect to the system by on-
screen operation.
Check that the "NFC Easy Connect"
app is displayed on the
smartphone.