Sony SRS-X77 사용 설명서 - 페이지 11

{카테고리_이름} Sony SRS-X77에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SRS-X77 48 페이지. Personal audio system
Sony SRS-X77에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 시작 매뉴얼 (2 페이지), 사용 설명서 (38 페이지)

페이지 인쇄

Listening to music through a

BLUETOOTH connection

Pairing the unit with a

BLUETOOTH device and

listening to music

You can listen to music from BLUETOOTH

device over a wireless connection.

Before using the BLUETOOTH function,

perform pairing to register your BLUETOOTH

device.

Note

 When pairing the unit with a BLUETOOTH device,

place the BLUETOOTH device within one meter

of the unit.

 When pairing the unit with a BLUETOOTH device,

connect the unit to the AC outlet or charge the

battery sufficiently.

 If your BLUETOOTH device is compliant with

one-touch connection (NFC), skip the next

procedure. See "Listening to music by one-touch

action (NFC)" (page 13).

Turn on the unit.

The / (on/standby) indicator lights

up in green.

Tap the

(BLUETOOTH)

PAIRING button.

The

(BLUETOOTH) indicator begins to

flash in white.

Tip

 From the factory, pairing information is not

stored in the unit. As such, when you tap

the

(BLUETOOTH)

the

(BLUETOOTH) indicator will begin to

flash quickly in white and the unit enters

pairing mode automatically. In this case,

proceed to step 4.

 When you tap the

PAIRING button, the unit tries to make

BLUETOOTH connection with the last

connected BLUETOOTH device. If the

device is nearby, the BLUETOOTH

connection is established automatically

and the

(BLUETOOTH) indicator stays lit.

When you want to connect another

PAIRING button,

(BLUETOOTH)

BLUETOOTH device, terminate the current

BLUETOOTH connection by operating the

currently connected BLUETOOTH device.

Tap and hold the

PAIRING button until beeps

are heard.

The

(BLUETOOTH) indicator begins to

flash quickly in white, and the unit

enters pairing mode.

Perform the pairing procedure on

the BLUETOOTH device to detect

the unit.

When a list of detected devices appears

on the display of the BLUETOOTH

device, select "SRS-X77".

If passkey entry is required on the

display of the BLUETOOTH device, enter

"0000".

Note

Stop playback on the BLUETOOTH device

before performing the pairing procedure.

Loud sound may be output when the

BLUETOOTH connection is established. In

addition, after the connection is established,

loud sound may be output at the time of the

first playback operation. It is recommended

to turn down the volume before starting

playback.

Make the BLUETOOTH connection

from the BLUETOOTH device.

When the BLUETOOTH connection is

established, the

indicator stays lit.

If the BLUETOOTH connection is not

established, repeat from step 3.

Adjust the volume on the

BLUETOOTH device, or tap the

VOL (volume) –/+ button to

adjust the volume.

(BLUETOOTH)