Sony SS-CCP1 서비스 매뉴얼 - 페이지 12

{카테고리_이름} Sony SS-CCP1에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SS-CCP1 46 페이지.

페이지 인쇄

[Liquid Crystal Display All Lit Check Mode]

Procedure:

1. Set to standby state.

2. Press three buttons of p (TAPE), p (CD), and

simultaneously.

3. Liquid crystal display are all turned on.

4. To exit from this mode, press the 1/

OFF.

[Tape Deck Aging Mode]

This mode can be used for operation check of tape deck section.

Procedure:

1. Set a tape in the tape deck.

2. Set to standby state.

3. Press three buttons of p (TAPE), p (CD), and

multaneously.

4. The aging is executed in bellow sequence.

5. To exit from the aging mode, press the 1/

power OFF.

Aging mode sequence:

Start

FWD Play

1 minute

REC pause for 3 seconds

FWD REC

3 minutes

Fast forward

REV Play

1 minute

REC pause for 3 seconds

REV REC

3 minutes

Rewind

SECTION 4

SERVICE MODE

[MD/VIDEO]

button to turn the power

[TAPE]

si-

button to turn the

Shut off

– 11 –

[CD Aging Mode]

This mode can be used for operation check of CD section.

Procedure:

1. Load a CD disc.

2. Set to standby state.

3. Press three buttons of p (TAPE), p (CD), and

simultaneously.

4. The aging is executed in bellow sequence.

5. To exit from the aging mode, press the 1/

power OFF.

Aging mode sequence:

Start

Open the disc tray

Close the disc tray

Play the last track

[TUNER]

button to turn the