Sony SS-GN800 사용 설명서 - 페이지 23

{카테고리_이름} Sony SS-GN800에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SS-GN800 36 페이지. Mini hi-fi component system
Sony SS-GN800에 대해서도 마찬가지입니다: 서비스 매뉴얼 (4 페이지)

페이지 인쇄
Sony SS-GN800 사용 설명서

Display

Changing the spectrum
analyzer display
1
Press AMP MENU.
"SPECTRUM" appears in the display.
2
Press PUSH ENTER (or ENTER on the
remote).
The last selected spectrum appears.
3
Press < or , repeatedly to select the
setting you want.
The display changes as follows:
SPECTRUM 1T
t SPECTRUM 2
Y
SPECTRUM OFF
R
t SPECTRUM 4 T
4
Press PUSH ENTER (or ENTER on the
remote).
Adjusting the brightness
of the display
1
Press AMP MENU.
"SPECTRUM" appears.
2
Press M or m repeatedly to select
"DIMMER", then press PUSH ENTER
(ENTER on the remote).
The last selected dimmer appears.
3
Press < or , repeatedly to select the
setting you want.
The display changes as follows:
t DIMMER 1 y
DIMMER 2 T
tDIMMER 3T
4
Press PUSH ENTER (or ENTER on the
remote).
Changing the power
illuminator
You can select the power illuminator as you
want.
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator mode changes cyclically as follows:
PATTERN 1 t PATTERN 2 t PATTERN 3
t PATTERN 4 t PATTERN OFF
Notes
• When you turn VOLUME (or press VOL +/– on the
Y
remote), power illuminator shows the current
SPECTRUM 3
volume level.
R
• During the demonstration display, you can turn on
or off power illuminator by pressing
ILLUMINATION.

Turning off the display

— Power Saving Mode

The demonstration display and the clock
display can be turned off to minimize the
amount of power consumed during standby
mode (Power Saving Mode).
Press DISPLAY repeatedly while the
system is turned off until the
demonstration display or the clock display
disappears.
To cancel Power Saving Mode
Press DISPLAY once to show the
demonstration display or twice to show
the clock display.
Each time you press the button, the system
changes cyclically as follows:
Demonstration
Mode
1)
The display changes and the indicators flashes even
when the system is turned off.
2)
"--.-- " appears in the display if you have not set the
clock.
1)
2)
t Clock
t Power Saving
continued
MHC-GN800 4-244-569-13 (3)
GB
23