Sony SS-SHAKE33 사용 설명서 - 페이지 30

{카테고리_이름} Sony SS-SHAKE33에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SS-SHAKE33 48 페이지. Home audio system
Sony SS-SHAKE33에 대해서도 마찬가지입니다: 서비스 매뉴얼 (10 페이지)

Sony SS-SHAKE33 사용 설명서
Creating your own
sound effect
You can raise or lower the levels of
specific frequency bands, then store the
setting in the memory as "CUSTOM EQ".
1
Press OPTIONS on the unit.
2
Press
"EQ EDIT", then press
3
Press
the equalizer level, then press
.
Frequency band
4
Repeat step 3 to adjust the level
of other frequency bands and
surround effect.
To exit the options menu, press
OPTIONS on the unit.
To select the custom equalizer
setting
Press MUSIC repeatedly to select
"CUSTOM EQ".
GB
30
/
repeatedly to select
/
repeatedly to adjust
Equalizer level
Creating a party
atmosphere
(DJ EFFECT)
1
Press the following button to
select the effect type.
The selected button lights up and the
effect is activated.
• FLANGER: Create a deep flanging
.
effect that is similar to the roar of a
jet plane.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on vocals.
• PAN: Create a feeling that the sound
is moving around the speakers
between left and right channels.
• WAH: Create a special effect of
"Wah-wah" sound by moving the
frequency of a filter up and down
automatically.
2
Press DJ CONTROL +/– to adjust
the effect level.
To turn off the effect
Press the selected effect button again.
Notes
• The DJ EFFECT is automatically turned off
when you turn off the system or change the
function or tuner band.
• If you activate the DJ EFFECT during
transfer, the sound effect will not be
transferred to the USB device.
• You cannot use VOLUME/DJ CONTROL
on the unit to adjust the volume when the DJ
EFFECT is activated. Press VOLUME +/– on
the remote control to adjust the volume.