Sony SS-XGR600 사용 설명서 - 페이지 24

{카테고리_이름} Sony SS-XGR600에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SS-XGR600 36 페이지. Sony component hi-fi stereo system operating instructions lbt-xgr88/xgr66 lbt-xgr600

페이지 인쇄

C MD (VIDEO) IN L/R jacks

Use audio cords (not supplied) to connect an

optional component (such as an MD deck or a

VCR) to these jacks. You can then record or

listen to analogue audio from that component

through this system.

D VIDEO OUT jack

Use a video cord (not supplied) to connect an

optional component (such as a TV) to this jack.

You can then output video to that component

from the connected video game through this

system.

E PHONO IN L/R jacks

Use audio cords (not supplied) to connect an

optional component (such as a turntable) to

these jacks. You can then record or listen to

analogue audio from that component through

this system.

F GAME INPUT AUDIO L/R jacks

Use audio cords (not supplied) to connect an

optional component (such as a video game or

camcorder, etc.) to these jacks. You can then

record or listen to analogue audio from that

component through this system.

G GAME INPUT VIDEO jack

Use video cord (not supplied) to connect an

optional component (such as a video game or

camcorder, etc.) to this jack. You can then

output video to the connected TV from that

component through this system.

Notes

• The video game machine image may appear on the

TV screen even if the system is turned off.

• See "Selecting the surround effect" on page 17 for

video game sound effects.

• If you press GAME while the system is off, the

system turns on, the function switches to GAME, and

the equalizer also switches to the GAME EQ.

• If you press GAME while the system is on, the

function switches to GAME and the equalizer

automatically switches to the GAME EQ in the same

manner.

Listening to audio from a

connected component

Listening to an MD deck or

VCR, etc.

Connect the audio cords.

See "Hooking up optional components" on

page 23.

Press FUNCTION repeatedly until "MD"

or "VIDEO" appears.

Start playing the connected component.

Notes

• Holding down FUNCTION, and then pressing ?/1

while the power is off automatically turns the power

on and selects "VIDEO" as the function. When the

system is in Power Saving Mode, this function does

not work.

• If the sound is distorted or too loud when "VIDEO"

is selected or you want to switch back to "MD,"

repeat the operation described above to switch to

"MD."

Listening to a turntable, etc.

Connect the audio cords.

See "Hooking up optional components" on

page 23.

Press FUNCTION repeatedly until

"PHONO" appears.

Start playing the connected component.