Sony ST-SDE700 사용 설명서 - 페이지 15

{카테고리_이름} Sony ST-SDE700에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony ST-SDE700 32 페이지. Dab/fm/am tuner

페이지 인쇄

Receiving DAB Broadcasts

Before you can receive

DAB stations

(DAB INITIAL SCAN)

Before you can receive DAB stations, you

must register the contents of broadcast (service

components) so that they can be received by

this tuner using the DAB INITIAL SCAN

procedure.

Be sure to use the buttons on the tuner for this

operation.

POWER

DIMMER

DISPLAY

AUTO-BETICAL

DAB

SELECT

INIT SCAN

NAME IN

FM MODE

Press BAND repeatedly to

select the DAB band.

Press DAB INIT SCAN.

"DAB SCAN" flashes on the display.

Press ENTER.

"SCAN ON" appears in the display and

the tuner scans and stores all the DAB

broadcasting contents and registers them

in this tuner.

When done, "FINISH" appears in the

display momentarily and the tuner returns

to the normal operation.

TUNING/SELECT

TUNING MODE

RETURN

BAND

MEMORY

ENTER

PRESET

DIRECT

Notes

• If you have not registered the contents of broadcast

(service components) in DAB band, "DAB TUNE"

appears in the display for a while, then

"DAB _ _ _ _" appears. "PLEASE RUN DAB

SCAN FOR DAB STATION" will then scroll

across the display. In this case, do the DAB

INITIAL SCAN procedure (page 15).

• Buttons on the tuner or supplied remote will not

function during DAB INITIAL SCAN procedure,

except POWER.

• If you move to another area, repeat this procedure

to store stations in your new area.

• This procedure does not create any presets.

• This procedure clears all previously stored presets.

• For details on presets, see "Presetting DAB

stations" on page 16.

Automatic tuning

10/0

DAB

PRESET

Press DAB to select the DAB

band.

The last received station is tuned in.

When selecting DAB, "DAB TUNE" will

appear in the display while the tuner is

collecting DAB data. Please wait until

this message disappears.

ENTER

MEMORY

AUTO

TUNING

continued