Sony STR-DA6400ES - Multi Channel Av Receiver 사용 설명서 - 페이지 27
{카테고리_이름} Sony STR-DA6400ES - Multi Channel Av Receiver에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony STR-DA6400ES - Multi Channel Av Receiver 42 페이지. Multi channel av receiver
Sony STR-DA6400ES - Multi Channel Av Receiver에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 사양 (2 페이지), 제한 보증 (1 페이지), 네트워크 매뉴얼 (46 페이지)
페이지 인쇄
8
Press V/v repeatedly to select
"Start," then press
Receiver updating starts.
The MULTI CHANNEL DECODING
lamp on the front panel flashes while
updating.
When the updating complete, the receiver
will restart automatically.
Notes
• In the following cases, a message appears on the
TV screen and the update of the receiver is not
performed.
– when all versions are the latest one.
– when the receiver cannot retrieve the data, such
as when the network has not been set up, or
when the server is down, etc.
• Do not turn the receiver off or disconnect the
network cable during firmware updating. It may
cause a malfunction.
• It may take 30 minutes for the firmware updating to
complete.
Updating the receiver firmware
using the ES Utility
You can update the receiver firmware using the
ES Utility application software provided on
the CD-ROM supplied with the receiver. Refer
to the HELP of the ES Utility for details on
operations of the ES Utility.
1
Download the update program
from the support website on the
computer to which you
installed the ES Utility.
2
Press AMP.
The receiver can be operated using the
remote.
3
Press MENU.
The menu is displayed on the TV screen.
4
Press V/v repeatedly to select
"
Settings," then press
b.
5
.
6
7
8
9
Notes
• Do not turn the receiver off or disconnect the
network cable during firmware updating. It may
cause a malfunction.
• It may take 30 minutes for the firmware updating to
complete.
or
Press V/v repeatedly to select
"System," then press
Press V/v repeatedly to select
"System Update," then press
.
Press V/v repeatedly to select
"PC Update," then press
A confirmation screen appears on the TV
screen.
Press V/v repeatedly to select
"Start," then press
The status of waiting for the data from the
PC is displayed on the TV screen.
Click "System" in the ES Utility
window on the computer
screen, then click "Browse..."
and specify the path of the
update program, and click
"Start Update."
Receiver updating starts.
When updating complete, the receiver
will restart automatically.
or b.
.
.
27
GB