Sony ZS-PS50 운영 지침 - 페이지 2
{카테고리_이름} Sony ZS-PS50에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony ZS-PS50 2 페이지. Personal audio system
페이지 인쇄
Creating your own program (Program
Other Operations
Play)
You can arrange the playing order of up to 25
tracks/files on a disc/USB device.
Selecting play mode
1
Press CD
or USB
to turn on the CD or
USB function.
You can set the unit to play tracks or files repeatedly
2
Press PLAY MODE
repeatedly until "PGM"
or in random order while a disc/USB device is
appears on the display.
stopped.
3
Press or
to select a track/file.
Press PLAY MODE
repeatedly.
When you want to specify a folder that contains
MP3/WMA/AAC files, press
select a folder, and then press or
select a file.
4
Press ENTER
.
The track/file is programmed and the program
Each time you press the button, the indication
step number appears.
changes as follows:
(Example: audio CD)
Normal play (None)
Single repeat (
1)
All repeat (
)
Step number
Selected folder play (
)*
5
Repeat steps 3 and 4 to program additional
tracks/files.
Selected folder repeat play (
,
)*
6
Press
to start Program Play.
To play the same program again, press .
Shuffle play (
)
Note that the created program is cleared in the
following cases:
When you open the CD compartment.
Program play (PGM)
When you connect another USB device.
When you turn off the power of the unit in the
Program repeat play (
, PGM)
CD function.
Note
* These functions are available only when playing MP3/
If you try to program 26 tracks/files or more, "FULL" flashes
WMA files on an MP3/WMA disc or MP3/WMA/AAC files
on the display.
on a USB device.
To display programmed track/file
Playing tracks/files repeatedly (Repeat
information
Play)
After creating your own program, you can check
You can set the unit to repeatedly play CD-DA tracks
information about programmed tracks/files.
on an audio CD, MP3/WMA files on a CD-R/CD-RW
Press DISPLAY
repeatedly and the display
disc, or MP3/WMA/AAC files on a USB device in
changes as follows:
normal and program play modes.
Total number of steps Last programmed track/
1
Press CD
or USB
to turn on the CD or
file number
USB function.
2
To cancel Program Play
Proceed as follows.
Press
to stop playback, and then press PLAY
To repeat
Do this
MODE
repeatedly until "PGM" disappears from
the display.
1 Press PLAY MODE
A single track/
repeatedly until "
1" appears.
file
To delete all tracks/files in the current
2 Press or to select
program
a track/file that you want to
Stop playback, and then press
repeat.
appears and you can create a new program,
3 Press .
following the procedure "Creating your own
1 Press PLAY MODE
All tracks/files
program (Program Play)."
repeatedly until " " appears.
2 Press .
1 Press PLAY MODE
A selected folder
Presetting radio stations
on an MP3/WMA
repeatedly until " " and " "
disc or USB
appear.
You can store radio stations in the unit's memory.
2 Select a folder by pressing
+
device
or .
You can preset up to 30 radio stations, 20 for FM and
3 Press .
10 for AM.
1 Program tracks/files (see
Programmed
1
Press FM/AM
repeatedly to turn on the
"Creating your own program
tracks/files
radio function and select the "FM" or "AM"
(Program Play)").
band.
2 Press PLAY MODE until
2
"PGM" and " " appear on the
Hold down FM/AM
until "AUTO" flashes on
display.
the display.
3 Press .
To cancel Repeat Play
Press
to stop playback, and then press PLAY
MODE
repeatedly until " " (or "
1") disappears
3
from the display.
Press ENTER
to store the station.
The stations are stored in memory from lower
Playing tracks/files in random order
frequencies to higher ones.
(Shuffle Play)
You can set the unit to play CD-DA tracks on an
If a station cannot be preset
audio CD, MP3/WMA files on a CD-R/CD-RW disc or
automatically
MP3/WMA/AAC files on a USB device in random
You need to preset a station with a weak signal
order.
manually.
1
Press CD
or USB
to turn on the CD or
1
Press FM/AM
repeatedly to select a band.
USB function.
2
Tune to the desired station.
2
Press PLAY MODE
repeatedly until " "
3
Hold down ENTER
until "FM-xx" or "AM-xx"
appears on the display.
flashes on the display.
3
Press
to start Shuffle Play.
(Example: FM)
To cancel Shuffle Play
Press
to stop playback, and then press PLAY
MODE
repeatedly until "
" disappears from the
display.
4
Press PRESET + or
until the preset
Tip
During Shuffle Play, you cannot select the previous track/file
number for the station you want flashes on
by pressing
.
the display.
5
Press ENTER
to store the station.
If another station is already assigned to the
selected preset number, that station is replaced
by the new one.
Tip
The preset radio stations remain in the unit's memory even
in the following situations.
The AC power cord is unplugged.
The batteries are removed.
Precautions
Listening to preset radio stations
1
Press FM/AM
repeatedly to turn on the
Discs that this unit CAN play
radio function and select the "FM" or "AM"
Audio CD (CD-DA*
band.
CD-R/CD-RW that contains MP3/WMA files and is
2
Press PRESET + or
to select a stored
finalized*
preset number for the desired radio station.
*1
CD-DA is the abbreviation for Compact Disc Digital Audio.
Tip
It is a recording standard used for audio CDs.
By repeatedly pressing DISPLAY
while listening to the
*2
Finalizing is the process to make the CD-R/CD-RW discs
+ or
radio, the radio information changes between showing the
playable on the consumer disc player products, and the
first to
preset number and the frequency.
finalizing can be enabled or disabled as optional settings
to
The preset number display automatically returns to the
during disc creation in most recording software.
frequency display after 2 seconds have elapsed.
Discs that this unit CANNOT play
CD-R/CD-RW other than those recorded in audio
Using the Sleep Timer
CD format or formats conforming to ISO 9660
Level 1/Level 2 or Joliet
CD-R/CD-RW of poor recording quality, CD-R/
You can set the unit to turn off automatically after a
CD-RW with scratches or that is dirty, or CD-R/
set time has elapsed.
CD-RW recorded using an incompatible recording
1
device
Press SLEEP
.
CD-R/CD-RW that is unfinalized or finalized
The default setting ("90") appears and the
incorrectly
"SLEEP" indicator lights up on the display.
2
Press SLEEP
repeatedly to select the
Notes on discs
desired setting.
Clean the CD with a cleaning cloth if
the disc is dirty. Wipe the disc from
the center out. If there are scratches,
dirt or fingerprints on the disc, a
tracking error may occur.
Do not use solvents such as
Each time you press the button, the duration (in
benzine, thinner, commercially
minutes) changes on the display, and the
available cleaners or anti-static
selected setting is confirmed automatically after
spray intended for vinyl LPs.
about 4 seconds.
Do not expose the CD to direct sunlight or heat
Tip
sources such as hot air ducts, or leave it in a car
You can check the time left until the unit turns off by
parked in direct sunlight as there can be a
pressing SLEEP
again after setting the sleep timer.
considerable rise in temperature inside the car.
Do not stick paper or a sticker on the CD, or
scratch the surface of the CD.
Connecting optional components
After playing, store the CD in its case.
Note on DualDiscs
You can enjoy the sound from an optional
A DualDisc is a two sided disc product which
component, such as a portable digital music player,
mates DVD recorded material on one side with
through the speakers of this unit.
digital audio material on the other side. However,
Be sure to turn off the power of each component
before making any connections.
since the audio material side does not conform to
For details, refer to the instruction manual of the
the Compact Disc (CD) standard, playback on this
component to be connected.
product is not guaranteed.
1
Connect the AUDIO IN jack
to the line
Music discs encoded with copyright
protection technologies
output jack of the portable digital music
This product is designed to playback discs that
player or other component using an audio
conform to the Compact Disc (CD) standard.
connection cable (not supplied).
Recently, various music discs encoded with
2
Turn the connected component on.
copyright protection technologies are marketed
. "noSTEP"
3
Press AUDIO IN
and start playing sound on
by some record companies. Please be aware that
the connected component.
among those discs, there are some that do not
conform to the CD standard and may not be
The sound from the connected component is
playable by this product.
output from the speakers.
To connect the unit to a TV or video recorder/
On safety
player, use an extension cable (not supplied) with
As the laser beam used in the CD player section is
a stereo-mini jack on one end and two phono
harmful to eyes, do not attempt to disassemble
plugs on the other end.
the casing. Refer servicing to qualified personnel
only.
Should any solid object or liquid fall into the unit,
unplug the unit, and have it checked by qualified
personnel before operating it any further.
Discs with non-standard shapes (e.g., heart,
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do not
use such discs.
On power sources
For AC operation, use the supplied AC power cord;
do not use any other cord.
Unplug the unit from the wall outlet if it is not to
be used for an extended period of time.
When not using the batteries, remove them to
avoid damage that can be caused by battery
leakage or corrosion.
On placement
Do not leave the unit in a location near heat
sources, in a place subject to direct sunlight,
excessive dust or mechanical shock, or in a car
subject to the direct rays of the sun.
Do not place the unit on an inclined or unstable
surface.
Do not place anything within 10 mm of the rear of
the cabinet. The ventilation openings must be
unobstructed for the unit to operate properly and
prolong the life of its components.
Since a strong magnet is used for the speakers,
keep personal credit cards using magnetic coding
or spring-wound watches away from the unit to
prevent possible damage from the magnet.
On operation
If the unit is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player section. Should this occur, the unit will not
operate properly. In this case, remove the CD and
wait about an hour for the moisture to evaporate.
On handling the unit
Do not leave the CD compartment open to avoid
dust and debris contamination.
On cleaning the cabinet
Clean the cabinet, panel and controls using a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder, or solvent, such as alcohol or
benzine.
If you have any questions or problems concerning
your unit, consult your nearest Sony dealer.
Troubleshooting
General
1
tracks)
The power does not turn on.
2
correctly.
Make sure the AC power cord is connected to the
wall outlet securely.
Make sure the connector of AC power cord is
inserted into the AC IN jack securely.
Check if the batteries are inserted correctly,
matching the polarities.
Replace all the batteries with new ones when the
OPR/BATT indicator
dims.
There is no sound.
Make sure the appropriate function is selected for
the music or sound source you want to listen to.
Unplug the headphones when listening through
speakers.
The sound is noisy.
Is someone using a mobile phone or other
equipment emitting radio waves near the unit? If
so, move the unit away from such devices.
A small humming noise is heard from the
radio.
This is not a malfunction. You may hear a small
humming noise from the radio depending on the
status of the power supply.
"notUSE" appears.
You pressed an invalid button.
CD/MP3/WMA player
The CD player does not play even when a
CD is in place.
Place the CD with the label side up.
Clean the CD.
Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
The CD-R/CD-RW is blank or unfinalized.
There are no playable MP3/WMA files on the disc.
There is a problem with the quality of the CD-R/
CD-RW, recording device or application software.
Replace all the batteries with new ones when the
OPR/BATT indicator
dims.
"noCD" appears when the disc is loaded.
No disc is set in the CD compartment. Set a disc.
The CD may have a reading problem. Replace the
disc.
The CD may be placed upside down. Place the
disc with the label side up.
An unplayable disc (DVD, BD, etc.) is loaded.
Replace the disc.
"00" appears on the display when the disc
is loaded.
No audio files recorded in supported formats, or a
file to be played back has an unsupported file
extension.
"Err C13" appears when the disc is loaded.
The CD may be dirty. Clean the disc.
The CD may have scratches. Replace the disc.
The CD may have a reading problem. Replace the
disc.
A blank disc may be set in the CD compartment.
The sound drops out.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged.
Place the unit in a location free from vibrations.
Clean the lens with a commercially available
blower.
The sound may drop out or noise may be heard
when using a poor quality CD-R/CD-RW or if there
is a problem with the recording device or
application software.
Starting playback takes more time than
usual.
The following discs take a longer time to start
playback.
A disc recorded with a complicated tree
structure.
A disc that has many folders or non-MP3/WMA
files.
USB device
The USB device does not work properly.
If you connect an incompatible USB device, the
following problems may occur.
The USB device is not recognized.
File or folder names are not displayed on this
unit.
Playback is not possible.
The sound skips.
There is noise.
The sound output is distorted.
"Err C13" appears.
An unexpected error occurs in the connected
device.
An unknown device is connected.
"Err01" appears.
Specifications
An unsupported USB device is connected and
playback or pause operation is performed.
CD player section
" Err02 " appears and the unit turns off
System
automatically.
Compact disc digital audio system
An abnormal level has been detected in the
Laser diode properties
electrical current from the (USB) port
. In this
Emission duration: Continuous
case, remove the USB device from the (USB) port
Laser output: Less than 44.6 μW
and reconnect the USB device, and then turn
(This output is the value measurement at a distance of
200 mm from the objective lens surface on the optical
on the unit again. If this problem persists after
pick-up block with 7 mm aperture.)
turning on the power of the unit, contact your
Number of channels
nearest Sony dealer.
2
Frequency response
There is no sound.
20 Hz 20,000 Hz +1/–2 dB
The USB device may be connected incorrectly.
Wow and flutter
Turn off the unit and reconnect the USB device.
Below measurable limit
Then turn on the unit.
Radio section
Frequency range
There is noise, skipping, or distorted sound.
Models for Europe, Australia, New Zealand, Korea, Taiwan,
Turn off the unit and reconnect the USB device.
Kuwait, Saudi Arabia, UAE, Kenya, Mauritius, Nigeria,
Then turn on the unit again.
Tanzania, and Uganda
FM: 87.5 MHz 108 MHz (50 kHz step)
The music data itself contains noise, or the sound
AM: 531 kHz 1,602 kHz (9 kHz step)
is distorted. Noise may have entered during the
Models for Bolivia, Chile, Paraguay, Peru, and Uruguay
creation of audio files. Try re-creating audio files
FM: 87.5 MHz 108 MHz (100 kHz step)
and use them to play on this unit.
87.5 MHz 108 MHz (50 kHz step)
AM: 530 kHz 1,610 kHz (10 kHz step)
The USB device cannot be connected to the
531 kHz 1,602 kHz (9 kHz step)
(USB) port
.
Models for Indonesia, Malaysia, Philippines, Singapore,
The connector on the USB device or the USB cable
Pakistan, Bahrain, Iran, Jordan, Lebanon, Oman, Qatar,
Yemen, Angola, Cameroon, Cote d'Ivoire, Egypt, Ethiopia,
is being inserted backwards. Insert it to the
Ghana, Libya, Madagascar, Morocco, Mozambique,
(USB) port
in the correct direction.
Senegal, Sudan, Zambia, and Zimbabwe
FM: 87.5 MHz 108 MHz (50 kHz step)
" READ " is displayed for an extended time,
87.5 MHz 108 MHz (100 kHz step)
AM: 531 kHz 1,602 kHz (9 kHz step)
or it takes a long time before playback
530 kHz 1,610 kHz (10 kHz step)
starts.
Other models
The reading process can take a long time in the
FM: 87.5 MHz 108 MHz (100 kHz step)
following cases:
AM: 530 kHz 1,710 kHz (10 kHz step)
There are many folders or files on the USB
Intermediate frequency
device.
FM: 128 kHz
The file structure is complex.
AM: 45 kHz
The memory is almost full.
Antennas
FM: Telescopic antenna
The internal memory is fragmented.
AM: Built-in ferrite bar antenna
To avoid the above problems, we recommend that
Input
you adhere to the following guidelines:
AUDIO IN
Keep the total number of folders on a USB
Stereo mini jack
device to 100 or less.
(USB) port
Keep the total number of files per folder to 100
Type A, maximum current 500 mA, USB 2.0 Full Speed
or less.
compatible
Output
Erroneous display
(headphones) stereo mini jack
The data stored on the USB device may be
For 16
32
impedance headphones
corrupted. Send the music data to the USB device
Supported audio formats
again.
Supported bit rates
This unit can display only numbers and letters of
MP3 (MPEG 1 Audio Layer-3):
32 kbps 320 kbps, VBR
the alphabet. Other characters will not be
WMA:
displayed correctly.
48 kbps 192 kbps, VBR
AAC*:
The USB device is not recognized.
8 kbps 320 kbps, VBR
Turn off the unit and reconnect the USB device,
* USB function only
then turn on the unit.
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
The USB device is not functioning properly. Refer
32/44.1/48 kHz
to the USB device operation manual for details on
WMA:
how to deal with this problem.
32/44.1/48 kHz
AAC*:
Play does not start.
32/44.1/48 kHz
Turn off the unit and reconnect the USB device.
* USB function only
General
Play does not start from the first track.
Speaker
Full range, 8 cm dia., 6
, cone type (2)
Set the play mode to Normal Play.
Power output
MP3/WMA/AAC files cannot be played
2.0 W + 2.0 W (at 6
, 10% harmonic distortion)
back.
Power requirements
Models for Europe, Australia, New Zealand, Bolivia, Chile,
The audio files may have inappropriate file
Paraguay, Peru, and Uruguay
extensions. The file extensions supported by this
230 V AC, 50 Hz (AC power supply)
unit are as follows:
9 V DC (6 R14 (size C) batteries)
MP3: file extension ".mp3"
Models for Taiwan and Latin America (except for Bolivia,
WMA: file extension ".wma"
Chile, Paraguay, Peru, and Uruguay)
120 V AC, 60 Hz (AC power supply)
AAC: file extension ".m4a," ".3gp" and ".mp4"
9 V DC (6 R14 (size C) batteries)
The audio files may have been created in formats
Korean model
other than MP3/WMA/AAC formats.
220 V AC, 60 Hz (AC power supply)
The USB storage device uses a file system other
9 V DC (6 R14 (size C) batteries)
than FAT16 or FAT32.*
Other models
220 V 240 V AC, 50/60 Hz (AC power supply)
The files are encrypted or protected by passwords.
9 V DC (6 R14 (size C) batteries)
Power consumption
* This unit supports FAT16 and FAT32, but some USB storage
15 W
media may not support both file systems.
0.9 W (during standby mode)
For details, refer to the operation manual of the USB
Battery Life*
1,
*
2
storage device in question or contact the manufacturer.
Playback of CD
Approx. 9 hours
Radio
Playback of USB device
Approx. 11 hours (at 100 mA load)
Approx. 3 hours (at 500 mA load)
The sound is weak or reception is poor.
FM reception
Approx. 26 hours
Replace all the batteries with new ones.
Move the unit away from nearby TVs.
1
*
Measured by Sony standards. The actual battery life
For FM reception, extend the antenna to its full
may vary depending on the circumstances of the unit
length, and reorient it for best FM reception. For
or operating conditions.
*
2
When using Sony alkaline batteries.
AM reception, reorient the unit itself to find the
best reception.
Dimensions
Approx. 300 mm × 125 mm × 210.5 mm (W/H/D) (incl.
If you are in a building, listen near a window.
projecting parts)
If a mobile phone is placed close to the unit, a
Mass
loud noise may be heard from the unit. Keep the
Approx. 2 kg (incl. batteries)
phone away from the unit.
Supplied accessories
AC power cord (1)
The TV picture is unstable.
If you are listening to an FM program near a TV
Design and specifications are subject to change without
with an indoor antenna, move the unit away from
notice.
the TV.
After trying the suggested remedies, if the problem
persists, unplug the AC power cord or remove all the
batteries. After all the indications on the display
disappear, plug in the AC power cord again, or
re-insert the batteries. If the problem persists,
consult your nearest Sony dealer.
License and Trademark Notice
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Windows Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
Other trademarks and trade names are those of
®
their respective owners. In this manual, ™ and
marks are not specified.