Cisco ASA 5585-X 유지 관리 매뉴얼 - 페이지 29
{카테고리_이름} Cisco ASA 5585-X에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5585-X 44 페이지. Maintenance and upgrade procedures
Cisco ASA 5585-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (40 페이지), 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄
Chapter 4
Maintenance and Upgrade Procedures
Install the new fan module by aligning it with the fan module bay and pushing it into place until it
Step 3
is seated.
1
3
Tighten the captive screws.
Step 4
Verify that the fan indicator on the lower right-hand of the back panel is green.
Step 5
Installing a Slide Rail Kit
Before installing the appliance in a rack-mount slide rail, you must install the slide rail kit hardware.
The slide rail kit hardware ships with the ASA 5585-X.
Note
To install the slide rail kit hardware on the ASA 5585-X, follow these steps:
Power off the appliance.
Step 1
Remove the power cable from the appliance.
Step 2
If your appliance has the fixed cable-management brackets, do the following:
Step 3
a.
b.
c.
OL-22567-02
2
10 0-2 40
15 .0/ 8.0
56 /60 Hz
3
Fan module and module handle
Power supply module
Remove the cable-management brackets from the front sides of the appliance.
Remove the appliance from the rack.
Remove the front brackets, left and right side brackets, and left and right rear brackets from
the appliance.
Ci sc o AS
A 12 00 W
AC
C is co -A
C is co -A
S A -F A
S A -F A
V
.A
1
2
Fan module screw
Cisco ASA 5585-X Adaptive Security Appliance Hardware Installation Guide
Installing a Slide Rail Kit
N
N
2
4-29