Cisco ASR 9000 Series 매뉴얼 - 페이지 18
{카테고리_이름} Cisco ASR 9000 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 9000 Series 24 페이지. Line card
Cisco ASR 9000 Series에 대해서도 마찬가지입니다: 네트워크 설정 구성 (26 페이지), 구성 매뉴얼 (46 페이지), 구성 매뉴얼 (50 페이지), 구성 (46 페이지), 매뉴얼 (44 페이지), 빠른 참조 매뉴얼 (7 페이지)
페이지 인쇄
show controllers backplane ethernet location detail
Field
total output drops
Output
Output errors
Related Commands
Command
show controllers backplane ethernet location brief,
on page 11
show controllers backplane ethernet location
clients, on page 14
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
18
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
Description
Total number of packets dropped from the output
queue because the queue was full.
Indicates the total number of broadcast and multicast
packets transmitted by the interface.
Displays the number of errors transmitted on the
interface. Output errors occur when outgoing cells
are dropped or corrupted. The possible types output
errors are as follows:
• underruns—Number of times that the far-end
transmitter has been running faster than the
near-end receiver can handle.
• aborts—Number of illegal sequences of one bits
on the interface.
• loss of carrier—Number of times the interface
was reset because the carrier detect line of that
interface was up, but the line protocol was
down.
Description
display brief information about backplane Ethernet
interfaces in a particular location
Displays information about client applications in a
particular location.
OL-24762-01