Cisco ASR 9910 매뉴얼 - 페이지 42
{카테고리_이름} Cisco ASR 9910에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 9910 44 페이지. Replacing cisco asr 9000 series router components
페이지 인쇄- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Migrating from A99-SFC-S/A99-SFC-T to A99-SFC3-S/A99-SFC3-T Card
Step 2
Insert A99-SFC3 card in slot FC0. Follow the procedure explained in the topic
on page 27
Step 3
Wait for A99-SFC3 card to come online. Verify the card state is OPERATIONAL using the show platform
command.
Step 4
Repeat Step1 through Step 3 for migrating remaining FCs from slot FC1 to slot FC6.
Example:
Router# show platform
Node
--------------------------------------------------------------------------------
0/RSP0/CPU0
0/RSP1/CPU0
0/FT0
0/FT1
0/1/CPU0
0/FC0
0/FC1
0/FC2
0/FC3
0/FC4
0/PT0
0/PT1
Use the admin show alarm and show pfm location allcommands to verify no additonal alarms are raised
after replacing all the FCs.
MigratingfromA99-SFC-S/A99-SFC-TtoA99-SFC3-S/A99-SFC3-T
Card
Cisco ASR 9906 chassis supports the A99-SFC3-T fabric card and Cisco ASR 9910 chassis supports the
A99-SFC3-S fabric card. In this section, SFC refers to A99-SFC-S/A99-SFC-T.
Procedure
Step 1
Remove the SFC card from slot FC0. Follow the procedure explained in the topic
Cards from the Chassis, on page
Alarms are raised when fabric cards are removed and when the system has a combination of old and new
generation fabric cards. These alarms clear when all the fabric cards are replaced.
Step 2
Insert A99-SFC3-T/A99-SFC3-S card in slot FC0. Follow the procedure explained in the topic
Cards in the Chassis, on page 27
Step 3
Wait for A99-SFC3-T/A99-SFC3-S card to come online. Verify the card state is OPERATIONAL using the
show platform command.
Step 4
Repeat Step1 through Step 3 for migrating remaining FCs from slot FC1 to slot FC4.
Replacing Cisco ASR 9000 Series Router Components
42
Type
A9K-RSP5-TR(Standby)
A9K-RSP5-TR(Active)
ASR-9910-FAN
ASR-9910-FAN
A9K-8X100GE-TR
A99-SFC3
A99-SFC3
A99-SFC3
A99-SFC3
A99-SFC3
A9K-AC-PEM-V3
A9K-AC-PEM-V3
25.
Replacing Cisco ASR 9000 Series Router Components
Replacing Cards in the Chassis,
State
Config state
IOS XR RUN
NSHUT
IOS XR RUN
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
IOS XR RUN
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
Removing and Replacing
Replacing