Cisco ASR 9912 매뉴얼

{카테고리_이름} Cisco ASR 9912에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 9912 44 페이지. Replacing cisco asr 9000 series router components

Replacing Cisco ASR 9000 Series Router

Components

The router is equipped as ordered and is ready for installation and startup when it is shipped. As network

requirements change, you may need to upgrade the system by adding or changing components. This chapter

describes how to maintain router components.

•

Prerequisites and Preparation

Before you perform any of the procedures in this chapter, be sure that you:

• Review the b-asr9k-hardware-installation-guide_chapter1.pdf#nameddest=unique_8.

• Read the safety and ESD-prevention guidelines described in

• Ensure that you have all the necessary tools and equipment before beginning the procedure.

Have access to the safety and compliance document during the installation, see:

http://www.cisco.com/en/US/docs/routers/asr9000/hardware/rcsi/regulatory/compliance/asr9krcsi.html

Prerequisites and Preparation, on page 1

Replacing the Chassis Air Filter, on page 4

Removing and Replacing the Fan Trays, on page 10

Removing and Replacing Power System Components, on page 12

Removing and Replacing Cards from the Chassis, on page 25

Migrating from RP1 to RP2 Card, on page 27

Migrating from RP2 to RP3 Card, on page 30

Migrating from RSP440 to RSP880 or RSP880-LT Card , on page 33

Migrating from RSP4-S to RSP880-LT Card (ASR 9906 Router), on page 36

Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card, on page 38

Migrating from FC1 to FC2 Card, on page 41

Migrating from A99-SFC2 to A99-SFC3 Card, on page 41

Migrating from A99-SFC-S/A99-SFC-T to A99-SFC3-S/A99-SFC3-T Card, on page 42

Removing a Chassis from the Equipment Rack, on page 43

Installing a Replacement Chassis in the Equipment Rack, on page 44

Packing a Chassis for Shipment, on page 44

chapter1.pdf#nameddest=unique_10.

b-asr9k-hardware-installation-guide_

Replacing Cisco ASR 9000 Series Router Components