Cisco ATA 191 매뉴얼

{카테고리_이름} Cisco ATA 191에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ATA 191 10 페이지. Analog telephone adapter
Cisco ATA 191에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 관리 매뉴얼 (4 페이지), 사용자 설명서 (10 페이지), 시작하기 (8 페이지), 빠른 시작 매뉴얼 (13 페이지), 설정 매뉴얼 (6 페이지), 사용자 설명서 (40 페이지), 사용자 설명서 (30 페이지)

Your ATA

•

Your New ATA

Your analog telephone adapter (ATA) allows you to connect an analog device, such as an analog phone or

fax machine, to your network. The connected device can then function like the IP phones in your network.

Your new analog telephone adapter (ATA) has two interfaces:

• Two RJ11 ports for analog devices

• A RJ45 port for Ethernet

Light-emitting diodes (LEDs) on the ATA provide status.

Install your ATA with the components that are included in the box.

You'll perform these tasks:

• Install your ATA with the components in the box.

Devices Associated with Your ATA

Use your ATA to connect these types of devices to your network:

• Analog phones

Your New ATA, on page 1

Devices Associated with Your ATA, on page 1

Cisco ATA 191 and ATA 192 Hardware, on page 2

Install Your New ATA, on page 6

Phone Adapter Configuration Utility, on page 7

Supported ATA Call Features, on page 8

• Analog phones have no softkeys.

• The information that analog phones display depends on the model you have.

• You use the phone's flash button for hold, resume, transfer, and conference.

Your ATA