Argo S10112 서비스 매뉴얼 - 페이지 6

{카테고리_이름} Argo S10112에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo S10112 12 페이지. Fuel system

Fuel System

Installing the Fuel Tank

Thread the new pickup tube into the top of the fuel tank. Position the outlet facing

the rear of the tank.

IMPOR

IMPORT T T T T ANT

IMPOR

Be sure to replace any missing or damaged

cushioning required on the fuel tank frame

assembly before installing the tank. All

cushioning provides a secure fit for the

tank, and protects the tank from wear due

to vibration. Photo FS-6

Slip the new or cleaned tank through the

top of the seat support frame, or in from the rear compartment of the Argo. See

IMPORTANT on previous page.

Reconnect the filler hose to the tank and secure with the gear clamp.

Be sure to reconnect the fuel vent hose at the filler neck and ensure that it is facing

up and not kinked or pinched in any way.

With the tank in place, reinstall the tool box and secure with the 4 fasteners

Replace the fuel filter with a new one.

Place the front seat back into the vehicle.

Leakage in the fuel system is very dangerous! A spark or open flame can ignite

gasoline fumes, causing serious injury or death. Extensive vehicle damage will also

occur.

Regular inspection of the fuel tank and fuel line is essential to personal safety and good

vehicle performance. Inspect the fuel tank for:

cracks or leaks

•

loose or broken clamps

•

loose connection in pick-up pipe

•

Ontario Drive & Gear Limited

PH.(519)- 662-2840 FAX (519)- 662-2421

ANT

FS-6

Argo Service Manual

FS-6