Argo Vanguard Series 서비스 매뉴얼 - 페이지 6
{카테고리_이름} Argo Vanguard Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo Vanguard Series 12 페이지. Fuel system
Argo Vanguard Series에 대해서도 마찬가지입니다: 서비스 매뉴얼 (16 페이지)
Fuel System
Installing the Fuel Tank
1.
Thread the new pickup tube into the top of the fuel tank. Position the outlet facing
the rear of the tank.
IMPOR
IMPORT T T T T ANT
IMPOR
IMPOR
IMPOR
Be sure to replace any missing or damaged
cushioning required on the fuel tank frame
assembly before installing the tank. All
cushioning provides a secure fit for the
tank, and protects the tank from wear due
to vibration. Photo FS-6
2.
Slip the new or cleaned tank through the
top of the seat support frame, or in from the rear compartment of the Argo. See
IMPORTANT on previous page.
3.
Reconnect the filler hose to the tank and secure with the gear clamp.
4.
Be sure to reconnect the fuel vent hose at the filler neck and ensure that it is facing
up and not kinked or pinched in any way.
5.
With the tank in place, reinstall the tool box and secure with the 4 fasteners
6.
Replace the fuel filter with a new one.
7.
Place the front seat back into the vehicle.
Inspecting the Fuel Tank and Fuel Line
Leakage in the fuel system is very dangerous! A spark or open flame can ignite
gasoline fumes, causing serious injury or death. Extensive vehicle damage will also
occur.
Regular inspection of the fuel tank and fuel line is essential to personal safety and good
vehicle performance. Inspect the fuel tank for:
cracks or leaks
•
loose or broken clamps
•
loose connection in pick-up pipe
•
Ontario Drive & Gear Limited
PH.(519)- 662-2840 FAX (519)- 662-2421
ANT
ANT
ANT
ANT
FS-6
Argo Service Manual
FS-6
www.odg.com