Cisco C9300L-48UXG-4X 설치 매뉴얼 - 페이지 11

{카테고리_이름} Cisco C9300L-48UXG-4X에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C9300L-48UXG-4X 16 페이지.

Different power LED colors and their interpretation are listed under this section. It may take some time for a device to

boot up so refer to the power LED indicators to understand what the switch is doing during boot up. Be patient and let

the switch complete the whole boot-up process and connect to the Meraki cloud.

Do not power down or reset the device during a firmware upgrade. A device which has its power LED blinking white is

indicating that it is going through a firmware upgrade.

Once the devices are upgraded to the latest version continue configuring other switch features/settings. For details refer

to the

MS documentation

Installation Instructions

1. Attach the rack mount bracket to both sides of the switch as shown below:

2. Align the rack mount brackets on the sides of the switch onto the rack.