Cisco CAB-SM-LCSC-1M 설치 참고 사항
{카테고리_이름} Cisco CAB-SM-LCSC-1M에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco CAB-SM-LCSC-1M 42 페이지. Passive optical system
Cisco CAB-SM-LCSC-1M에 대해서도 마찬가지입니다: 설치 참고 사항 (36 페이지)
페이지 인쇄
Cisco Enhanced Wave Division Multiplexing
Optical System Installation Note
This document provides installation instructions for the Cisco Enhanced Wave Division Multiplexer
(EWDM) passive optical system. The EWDM system combines 1 GB Coarse Wave Division
Multiplexing (CWDM) connections using SFPs and GBICs with 10 GB Dense Wave Division
Multiplexing (DWDM) connections using XENPAK, X2, or XFP DWDM modules. These DWDM
connections can either be passive or boosted to allow a longer range for the connection. The EWDM
passive optical system product numbers are listed in
Table 1
EWDM Passive Optical System Product Numbers
Product Number
CWDM-CHASSIS-2=
EWDM-MUX8=
EWDM-OADM4=
EWDM-OADM2=
EWDM-OA=
CAB-SM-LCSC-1M=
CAB-SM-LCSC-5M=
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006–2009 Cisco Systems, Inc. All rights reserved.
Table
Description
two-slot chassis, 1 Rack Unit
8-channel MUX/DEMUX module
Four-channel Optical Add/Drop Multiplexer
(OADM) module
2-channel OADM module
DWDM booster amplifier
LC to SC connector cable, 1 m
LC to SC connector cable, 5 m
1.