DIGITIZE System 3505 설치 및 운영 매뉴얼 - 페이지 10

{카테고리_이름} DIGITIZE System 3505에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGITIZE System 3505 20 페이지. Remote alarm terminal option
DIGITIZE System 3505에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지)

페이지 인쇄

You should activate the daily test following either a restart of the SYSTEM 3505, or if

the data line between the SYSTEM 3505 and the Monaco D-700/7000 has been

disconnected for a period of time.

Whether initiate automatically or manually the following will be printed on activation of

a daily test request.

1.8

AUTO LOAD OF BT-2 BOXES

The SYSTEM 3505 will auto load all the BT-2 Boxes into its non-volatile memory

whenever it is initially powered up and a Daily test is requested. When the BT-2 boxes

are loaded into the SYSTEM 3505, all the BT-2 units are placed in the "Active" mode. If

any boxes are Disabled, you need to go to the 3 6 SET menu and Disable the non-active

BT-2 units. See the section on the 3 6 SET menu.

If you install a new or spare SYSTEM 3505 unit, you will need to purge the BT-2 list in

the new unit, so it will auto load the field BT boxes. You can enter the boxes one by one

into the SYSTEM 3505 via the 3 6 SET menu.

1.9

ADD/CHANGE BT-2 UNITS

To bring up the Monaco D-500/700 SET menu, press 3 6 then the SET key. The display

will be as follows:

DIGITIZE, INC. 700270 REV A 01/06

Specifications Subject to Change Without Notice

1-5