Cisco Catalyst 3560-E Series 시작하기 매뉴얼 - 페이지 6

{카테고리_이름} Cisco Catalyst 3560-E Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 3560-E Series 25 페이지. Switches and power supply modules
Cisco Catalyst 3560-E Series에 대해서도 마찬가지입니다: 제품 게시판 (5 페이지), 질문 및 답변 (3 페이지), 제품 지원 게시판 (2 페이지), 제품 지원 게시판 (5 페이지), 설치 참고 사항 (20 페이지)

페이지 인쇄

The Express Setup Basic Settings page appears. If it does not appear, see the "In Case of

Step 12

Difficulty" section on page 20.

Enter this information in the Network Settings fields:

Step 13

• In the Management Interface (VLAN ID) field, the default is 1. Enter a new VLAN ID

only if you want to change the management interface through which you manage the

switch. The VLAN ID range is 1 to 4094.

• In the IP Address field, enter the IP address of the switch. In the Subnet Mask field, click

the drop-down arrow, and select a Subnet Mask.

• In the Default Gateway field, enter the IP address for the default gateway (router).

• Enter your password in the Switch Password field. The password can be from 1 to 25

alphanumeric characters, can start with a number, is case sensitive, allows embedded

spaces, but does not allow spaces at the beginning or end. In the Confirm Switch

Password field, enter your password again.

Note

You must change the password from the default password,

(Optional) Enter this information in the Ethernet Management Port Settings fields:

Step 14

In the IP Address field, enter the IP address of the Ethernet management port. In the Subnet

Mask field, click the drop-down arrow, and select a Subnet Mask.

cisco .